Chain guard for your Zündapp Belmondo moped / moped.
The steel cover plate has been faithfully reproduced and painted. Thanks to the weld nuts, the plate is ready to install and can be mounted directly to the blower cover with two screws.
Hole spacing: 66 mm
Thread: M4
Thickness: 0.5 mm
Material: steel
Surface: painted
The chain guard plate provides a perfect finish and is a must-have for every original Belmondo restoration.
You can find more add-on parts for your Zündapp in the accessories section.
Nostalgic product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Color | silver |
| Surface | varnished |
| Thread type | M4x0.7 (standard thread) |
| Height | 137 mm |
| Total length | 99 mm |
| Number of fixing points | 2 pcs |
| Zündapp Belmondo |
Ratings
Accessories & related products
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Manufacturer: ESJOT · Material: Steel · Surface: blank / oiled · Chain pitch: 1/2" x 3/16" · Chain type: 415H · Rolling circumference: 1448 mm · Number of chain links: 114 pcs · Chain lock type: Spring lock · Ø bore: 4.05 mm · Ø Pin: 4 mm · Color: gray
EUR 22.60
swiing® revival 17" rear fender Inox | Zündapp Belmondo
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Folding the ends: closed folded · Folding the ends: not folded · Shape of the mudguard: partly round · Total length over ends: 595 mm · Scope: 950 mm · Wide mudguard profile: 70 mm · Mounting type: Nuts & bolts · Height of mudguard profile: 25 mm · Total height from support surface to top edge: 305 mm · Wheel size: 17 " · Color: Chrome
EUR 95.20
swiing® revival 17" front fender Inox | Zündapp Belmondo
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Folding the ends: closed folded · Shape of the mudguard: partly round · Total length over ends: 525 mm · Scope: 638 mm · Wide mudguard profile: 69 mm · Mounting type: Nuts & bolts · Height of mudguard profile: 25 mm · Total height from support surface to top edge: 157 mm · Wheel size: 17 " · Color: Chrome
EUR 71.40
swiing® revival rear mudguard strut chrome | Zündapp Belmondo
Manufacturer: swiing® revival parts · Material: Steel · Surface: chrome-plated · Number of fixing points: 3 pcs · Distance mudguard - center hole: 318 mm · Total length: 345 mm · Ø mounting hole: 6.5 mm · Mounting type: Nuts & bolts · Color: Chrome
EUR 42.80
Moped fans also bought
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 2200 mm · Nipple length: 5 mm · Number of components: 1 pcs · Area of application: Standard
EUR 2.85
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C · Area of application: Gearbox lubrication with clutch
EUR 11.80
EUR 26.22/l
Fuel tap vertical M10x1 (to screw in) outgoing at the bottom / cast iron
Manufacturer: Made in Italy · Possible lever positions: open / closed / reserve · Material lever: Metal · Filter type: Plastic net · Installation direction: vertical / vertical · Outlet direction: below · Mounting type: screw in (thread) · Spare tube shape: straight · Thread type: MF10x1 (fine pitch thread) · Ø fuel hose connection: 6 mm · Reserve level: 65 mm
EUR 17.80
Collection only possible with online purchase and appointment.
