Set of galvanized M6 threaded bolts and flange nuts with increased strength for the intake, exhaust or cylinder base mounting of various mopeds, mopeds and small motorcycles (Puch, Sachs, Zündapp, etc.).
.These extended stud bolts can also be used when fitting a lift plate. The original cylinder stud bolts are usually too short.
| Manufacturer | swiing® revival parts |
| Material | Steel |
| Surface | galvanized (blue) |
| Drive | External hexagon |
| Thread type | M6x1 (standard thread) |
| Thread length | 20 mm, 12 mm |
| Total length | 38 mm |
| Width across flats | 10 mm |
| Strength class | 10.9, 8 |
Ratings
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.10
EUR 2’610.00/l
swiing® revival stud bolt M6x38 inlet/outlet galvanized (10.9 strength)
Diameter: 5.9 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Thread length: 11 mm · Thread length: 19 mm · Total length: 38 mm · Strength class: 10.9
EUR 2.40
swiing® ingenious stud bolt set M6 / M5 Sachs (12.9 strength) Special
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Thread type: M5x0.8 (standard thread) · Thread type: M6x1 (standard thread) · Diameter: 6 mm · Drive: External hexagon · Total length: 27.3 mm · Thread length: 9.5 mm · Thread length: 14 mm · Strength class: 10 · Strength class: 12.9 · Width across flats: 8 mm
EUR 23.00
Moped fans also bought
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 2200 mm
EUR 2.85
Airsal gasket set 44 - 45 mm
Manufacturer: Airsal · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Ø cylinder: 44 mm · Ø cylinder: 45 mm · Hole spacing inlet: 38 mm · Number of components: 4 pcs · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 mm · Decompressor: Yes · Area of application: Tuning
EUR 11.80
swiing® revival stud bolt set M6 x 106 | Puch
Diameter: 5.9 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Drive: External hexagon · Thread length: 13 mm · Thread length: 18.5 mm · Total length: 106 mm · Width across flats: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8.80
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Choke control: Hand choke · Nominal diameter: 15 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Mounting type: Plug connection clamped · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Total length: 66 mm · Mixed oil connection: No · Width: 50 mm · Vacuum connection: No · Height: 95 mm · Nozzle block: 2.17 · Camouflaged: Yes · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
EUR 95.20
swiing® revival stud bolt set M6x30 (10.9 strength) galvanized
Diameter: 6 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Drive: External hexagon · Thread length: 12 mm · Total length: 30 mm · Width across flats: 10 mm · Strength class: 8 · Strength class: 10.9
EUR 12.80
Collection only possible with online purchase and appointment.
