High-quality M11x180 thru axle made of galvanized steel for the front wheel on various Monark mopeds/mopeds.
The front axle with M11x1 mm thread is made of extremely durable special steel.
The ends are chamfered and the thread is perfectly cut. This makes it easy to fit the cones and wheel nuts.
Matching axle nuts can be found in the accessories section.
Nostalgic product for the highest standards from the swiing® quality brand.
| Manufacturer | swiing® revival parts |
| Ø shaft | 10.95 mm |
| Material | Steel |
| Total length | 180 mm |
| Surface | galvanized (blue) |
| Thread type | MF11x1 (fine pitch thread) |
| Shank length | 30 mm |
| Thread length | 75 mm |
| Monark |
Accessories & related products
Nut M11x1 x 10 SW19 Wheel nut galvanized
Strength class: 8 · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 1D · Drive: External hexagon · Thread type: MF11x1 (fine pitch thread) · Width across flats: 19 mm · Nominal diameter (thread): 11 mm · Height: 10 mm
EUR 2.95
swiing® revival nut M11x1 x 10 SW17 wheel nut Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Nominal diameter (thread): 11 mm · Drive: External hexagon · Nut type: Hexagon nut 1D · Height: 10 mm · Width across flats: 17 mm · Thread type: MF11x1 (fine pitch thread)
EUR 7.60
swiing® revival wheel nut M11x1 x 4 SW17 Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Nominal diameter (thread): 11 mm · Drive: External hexagon · Nut type: Hexagon flat nut · Height: 4 mm · Width across flats: 17 mm · Thread type: MF11x1 (fine pitch thread)
EUR 7.00
Bearing cone M11x1 mm
Material: Steel · Surface: gas nitrided · Height: 12 mm · Ø outside: 19 mm · Width across flats: 15 mm · Color: graphite colors · Ø ball [inch] / [mm]: 1/4" (6.35 mm) · Ø ball [inch] / [mm]: 3/16" (4.78 mm) · Ø ball [inch] / [mm]: 7/32" (5.56 mm) · Thread type: MF11x1 (fine pitch thread)
EUR 9.40
swiing® revival nut M11x1 x 4 SW17 wheel nut galvanized
Drive: External hexagon · Manufacturer: swiing® revival parts · Strength class: 8 · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut · Thread type: MF11x1 (fine pitch thread) · Width across flats: 17 mm · Nominal diameter (thread): 11 mm · Height: 4 mm
EUR 3.45
Explore categories from Hub & axle
Moped fans also bought
Hot 
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Cable length: 2200 mm
EUR 2.85
swiing® revival wheel bearing 25/37/6.3 coaster wheel
Bearing type: Ball ring · Bearing cage: Sheet steel cage ball-guided · Stock number: K042 · Inner ring width: 25 mm · Ball bearing closed: No · Manufacturer: swiing® revival parts · Ø ball: 6.34 mm · Groove ring: No · Area of application: Standard · Material: Steel · Ø inside: 25 mm · Ø outside: 36 mm · Width: 6.8 mm
EUR 9.40
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Oil type: GL4 · Contents: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
EUR 12.90
EUR 28.67/l
Nut M11x1 x 10 SW19 Wheel nut galvanized
Strength class: 8 · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 1D · Drive: External hexagon · Thread type: MF11x1 (fine pitch thread) · Width across flats: 19 mm · Nominal diameter (thread): 11 mm · Height: 10 mm
EUR 2.95
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
