Hot 
Fan-cooled 41 mm S3 (55 cc) racing kit suitable for your moped or small motorcycle with a Sachs 50/2 (DE) or 50/3 engine.
This tuning cylinder is a clear statement for anyone who wants real performance. Meticulously handcrafted by Tivedens Motor, this cylinder delivers uncompromising torque, crisp throttle response, and a riding experience that immediately impresses. Each individual cylinder is numbered and crafted with extensive experience, technical expertise, and a genuine passion for performance. Depending on the setup used, the manufacturer claims it can deliver 6.9–7.3 hp.
A racing cylinder for anyone who doesn’t want to spend time comparing options, but is looking for a part that works, delivers performance, and is simply fun. Install it, ride it, smile.
Scope of delivery as shown in Image 1.
Note: The cylinder is equipped with a large square intake port for a 17 mm carburetor and a large M40 exhaust thread. Please take this into account when selecting your additional components. Please observe the installation direction during assembly. The piston is installed with the arrow pointing toward the exhaust on the exhaust side.
You can find the matching cylinder head, mounting hardware, exhaust systems, and threadlocker in the accessories section.
Quality product from the Swedish manufacturer Tivedens Motor AB
| Nominal diameter | 41 mm |
| Manufacturer | Tivedens Motor AB |
| Area of application | Tuning |
| Material | Gray cast iron |
| Surface | varnished |
| Displacement | 55 ccm |
| Crankshaft stroke | 42 mm |
| Ø cylinder neck | 44 mm |
| Ø Outlet outside | 40 mm |
| Ø outlet inside | 29.5 mm |
| Inlet window | 17 x 15 mm |
| Thread inlet | M5x0.8 (standard thread) |
| Hole spacing inlet | 31 mm |
| Ø piston pin (B) | 12 mm |
| Outlet type | Union nut |
| Thread outlet | MF40x1.5 (fine pitch thread) |
| Number of fixing points | 4 pcs |
| Sachs | 50/2 50/3 50/4 |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Area of application: Chemistry · Contents: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Temperature resistance (min.): -75 - 200 °C · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 26.00
EUR 2’600.00/l
swiing® revival stud bolt M5 x 23 inlet (diaphragm) 10.9 | Sachs 50/2 (A3700)
Diameter: 4.9 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Total length: 23 mm · Thread type: M5x0.8 (standard thread) · Thread length: 6 mm · Thread length: 12 mm · Nominal diameter (thread): 5 mm · Pony OEM number: A3700 · Sachs OEM no.: 0640 016 101 · Sachs OEM no.: 0640 016 102
EUR 2.15
swiing® revival bolt set cylinder head galvanized | Sachs 503 / 50/2 / 50/3 / 50/4
Manufacturer: swiing® revival parts · Number of components: 12 pcs · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Color: silver · Total length: 34 mm · Drive: External hexagon · Screw head: Hexagon · Thread type: M6x1 (standard thread) · Width across flats: 10 mm · Shank: Yes · Thread length: 22 mm · Ø shaft: 5.85 mm · Nominal diameter (thread): 6 mm · Shank length: 8 mm · Strength class: 10.9
EUR 5.80
Exhaust set Sidepipe Ø 32 / 60 mm chrome | Sachs 50/2
Manufacturer: Made in Portugal · Material: Steel · Ø outside: 60 mm · Total length: 600 mm · Ø Internal connection: 32 mm · Ø Flame tube outside: 32 mm · Exhaust type: Sidepipe · Mounting type: Screwed clamp · Flame tube attachment: Flange
EUR 201.60
swiing® revival carburetor 17 mm Bing SSB 1/17/69
Manufacturer: swiing® revival parts · Width: 85 mm · Height: 100 mm · Total length: 132 mm · Area of application: Standard · Area of application: Tuning · Component group Carburetor: Carburetor complete · Material: Aluminum · Nominal diameter: 17 mm · Carburetor type: SSB · Mounting type: Flange · Hole spacing inlet: 31 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: without choke · Camouflaged: No · Nozzle size: 76
EUR 150.60
swiing® ingenious 41 mm cylinder head tuning | Sachs 50/2, 50/3, 50/4
Ø outside: 98 mm · Manufacturer: swiing® ingenious parts · Width: 95 mm · Height: 50 mm · Total length: 127 mm · Area of application: Standard · Material: Aluminum · Surface: sandblasted · Ø cylinder: 41 mm · Ø screw holder: 19 mm · Candle thread: long · Number of fixing points: 4 pcs · Hole pattern [mm]: 37 x 37 · Decompressor: M10x1.5
EUR 81.30
swiing® ingenious exhaust nut M40x1.5 long 32 mm manifold | Sachs
Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Nut type: Union nut · Ø inside: 32.5 mm · Thread type: MF40x1.5 (fine pitch thread) · Height: 22 mm · Nominal diameter (thread): 40 mm · Ø outside: 45 mm
EUR 25.70
BAD ASS cylinder head L Ø 41-43 mm | Sachs 502, 50/2, 50/3, 50/4
Manufacturer: BAD ASS · Material: Aluminum · Ø cylinder: 41 - 43 mm · Ø outside: 108 mm · Ø screw holder: 19.3 mm · Hole pattern [mm]: 37 x 37 · Number of fixing points: 1 pcs · Number of fixing points: 4 pcs · Area of application: Tuning · Decompressor: M10x1.5
EUR 177.90
Hot
Tivedens engine 41 mm cylinder kit S3 | Sachs 50/2 (DE), 50/3, 50/4
Manufacturer: Tivedens Motor AB · Material: Gray cast iron · Area of application: Tuning · Surface: varnished · Nominal diameter: 41 mm · Crankshaft stroke: 42 mm · Displacement: 55 ccm · Ø piston pin (B): 12 mm · Ø cylinder neck: 44 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 29.5 mm · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Number of fixing points: 4 pcs · Hole spacing inlet: 31 mm · Outlet type: Union nut · Thread outlet: MF40x1.5 (fine pitch thread)
EUR 344.00
Hot
Tivedens engine 41 mm cylinder kit S4 | Sachs 50/2 (DE), 50/3, 50/4
Manufacturer: Barikite · Manufacturer: Tivedens Motor AB · Material: Gray cast iron · Area of application: Tuning · Nominal diameter: 41 mm · Crankshaft stroke: 42 mm · Displacement: 55 ccm · Ø piston pin (B): 12 mm · Ø cylinder neck: 45 mm · Ø Outlet outside: 40 mm · Ø outlet inside: 18 mm · Ø outlet inside: 30 mm · Inlet window: 17 x 15 mm · Thread inlet: M5x0.8 (standard thread) · Number of fixing points: 4 pcs · Hole spacing inlet: 31 mm · Outlet type: Union nut · Thread outlet: MF36x1.5 (fine pitch thread)
EUR 379.60
Explore categories from Cylinder
Moped fans also bought
swiing® revival stud bolt inlet/outlet M6 x 30 (10.9 strength)
Diameter: 5.95 mm · Manufacturer: swiing® revival parts · Total length: 30 mm · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Thread length: 12 mm · Strength class: 10.9
EUR 2.15
Breaker with cable (Budget) | Bosch / Ducati
Manufacturer: Quenching · Material: Steel · Area of application: Original · Area of application: Standard · Cable available: Yes · Number of fixing points: 1 pcs · Ø Internal flywheel: 90 mm · Ø axle: 4 mm · Ø mounting hole: 4.5 mm · Cable length: 100 mm · BOSCH OEM number: 1 217 013 025 · BERU OEM number: 0 340 100 710
EUR 8.20
Ignition coil | Puch / Sachs / Zündapp
Place of use: Internal (in the ignition) · Manufacturer: Quenching · Area of application: Original · Area of application: Standard · Color: black · Ø cable holder: 6.4 mm · Total length: 76.5 mm · Height: 10.4 mm · Mounting type: Screws · Number of fixing points: 2 pcs · Ø Internal flywheel: 90 mm · Ø mounting hole: 4.5 mm · Cable length: 57 mm
EUR 22.40
NSK E15 shoulder ball bearing 15/35/8 (A1149)
Inner ring width: 8 mm · Manufacturer: NSK · Ball bearing closed: No · Bearing clearance: CN (standard) · Bearing cage: Brass cage ball-guided · Groove ring: No · Width: 8 mm · Material: Brass · Material: Steel · Stock number: E15 · Area of application: Standard · Bearing type: Shoulder bearing · Ø inside: 15 mm · Ø outside: 35 mm · Pony OEM number: A1149 · Sachs OEM no.: 0232 017 006
EUR 29.50
swiing® revival exhaust nut M40x1.5 galvanized (for 32 mm pipe) | Sachs
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Ø inside: 33.5 mm · Nut type: Union nut · Ø outside: 46 mm · Height: 19 mm · Thread type: MF40x1.5 (fine pitch thread) · Nominal diameter (thread): 40 mm
EUR 16.50
swiing® revival engine seal | Sachs 502, 50/2, 50/3, 50/4 (A1828)
Manufacturer: swiing® revival parts · Width: 170 mm · Number of components: 1 pcs · Material: Sealing paper · Color: sand-colored · Ø inside: 86 mm · Thickness: 0.4 mm · Total length: 250 mm · Number of fixing points: 16 pcs · Pony OEM number: A1828 · Sachs OEM no.: 0250 088 100
EUR 7.00
swiing® revival carburetor 17 mm Bing SSB 1/17/69
Manufacturer: swiing® revival parts · Width: 85 mm · Height: 100 mm · Total length: 132 mm · Area of application: Standard · Area of application: Tuning · Component group Carburetor: Carburetor complete · Material: Aluminum · Nominal diameter: 17 mm · Carburetor type: SSB · Mounting type: Flange · Hole spacing inlet: 31 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: without choke · Camouflaged: No · Nozzle size: 76
EUR 150.60
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
