Socket axle M12x218 made of galvanized steel for your moped, moped and small motorcycle.
The axle can be used for both front wheels and rear wheels. Due to the large width, it is increasingly used as a rear wheel axle. If necessary, the threaded shaft must be shortened on both sides.
The complete rear axle set is also equipped with the following parts:
- 2 pieces of M12 x 1 nuts (SW19 / 10 mm)
- 1 piece of spacer washer (Ø 24 x 2.8 mm)
- 2 pieces of bearing cone (D20 x d14 mm / SW17)
- 2 pieces of bearing shells (Ø outside: 29.3 / Ø inside: 26 mm / Ø bore: 15.5 mm / length: 9.2 mm)
- 1 piece M12 x 1 nuts (SW17 / 5 mm)
- 2 pieces dust ring (Ø outer: 29.15 mm / Ø inner: 20.5 mm / thickness: 0.4 mm)
To ensure that you can enjoy your new axle for a long time, we recommend that you order the higher-quality swiing cones in the accessories section at the same time.
You can find more axle parts in the accessories section.
| Thread type | MF12x1 (fine pitch thread) |
| Thread length | 78 mm |
| Ø shaft | 12 mm |
| Material | Steel |
| Surface | galvanized (blue) |
| Total length | 218 mm |
| Shank length | 71 mm |
| Puch |
| Sachs |
Accessories & related products
Nut M12x1 x 10 SW19 Wheel nut Inox
Drive: External hexagon · Width across flats SW: 19 mm · Thread type: MF12x1 (fine pitch thread) · Material: Chrome steel (known as Nirosta®) · Surface: blank · Nut type: Hexagon nut 1D · Height: 10 mm · Strength class: A2-70 · Area of application: Standard
EUR 4.60
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Color: blue · Contents [ml]: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Type of application: 1K · Gap dimension (max.): 0.01 mm · Alignment time: 600 sec · Temperature resistance (min.): -75 - 200 °C · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
EUR 25.90
EUR 2’590.00/l
66HEROES cap nut M12x1 stainless steel polished
Manufacturer: 66HEROES · Material: Chrome steel (known as Nirosta®) · Surface: polished · Nut type: Cap nut · Drive: External hexagon · Thread type: MF12x1 (fine pitch thread) · Thread depth: 23.4 mm · Width across flats SW: 17 mm · Height: 26.2 mm
EUR 14.10
Moped fans also bought
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Ø cable: 5 mm · Ø cable: 7 mm · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Component group Carburetor: Spark plug connector · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.40
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Area of application: Standard
EUR 2.85
Nut M12x1 x 10 SW19 Wheel nut Inox
Drive: External hexagon · Width across flats SW: 19 mm · Thread type: MF12x1 (fine pitch thread) · Material: Chrome steel (known as Nirosta®) · Surface: blank · Nut type: Hexagon nut 1D · Height: 10 mm · Strength class: A2-70 · Area of application: Standard
EUR 4.60
Nut M12x1 x 5 SW19 Wheel nut galvanized
Drive: External hexagon · Width across flats SW: 19 mm · Thread type: MF12x1 (fine pitch thread) · Material: Steel · Surface: galvanized (blue) · Nut type: Hexagon nut 0.5D · Height: 5.8 mm · Strength class: 8 · Area of application: Standard · Pony OEM number: A4249 · Sachs OEM no.: 0242 124 000
EUR 2.15
FAG 16101 A 2RS wheel bearing 12/30/8
Bearing cage: "-" Sheet steel cage ball-guided · Stock number: 16101 · Inner ring width: 8 mm · Manufacturer: FAG · Dust protection type: 2RS - NBR contact seal on both sides · Bearing clearance: CN (standard) · Groove ring: No · Material: Plastic · Material: Steel · Surface: blank · Ø inside: 12 mm · Bearing type: Deep groove ball bearing · Ø outside: 30 mm · Ball bearing closed: Yes · Width: 8 mm · Area of application: Standard
EUR 17.40
Collection only possible with online purchase and appointment.
