
Adjustable oil pressure shock absorbers in black with chrome-plated coil spring for your moped, moped and small motorcycle.
The hardness or preload of the springs can be adjusted in five stages thanks to the special spring mount. The rear springs should always be secured with large washers to prevent the bearing bushes from shifting if lateral forces occur.
Length (mount – mount): 340 mm
Ø outer spiral spring: 52 mm
Ø spars: 32 mm
Ø bushings for fastening: 10 mm / 12 mm
Color: black / chrome
The scope of delivery corresponds to one pair.
You can find rear springs from other manufacturers as well as the washers and fastening material in the accessories section.
Quality product from the manufacturer YSS.
| Manufacturer | YSS |
| Material | Steel |
| Color | black, Chrome |
| Surface | varnished, chrome-plated |
| Damping type | Hydraulic (oil) |
| Adjustable | Yes |
| Ø outside | 52 mm |
| Total length | 370 mm |
| Ø spars | 32 mm |
| Number of fixing points | 2 pcs |
| Mounting type | Nuts & bolts |
| Ø Fastening inside | 10 mm, 12 mm |
| Hole spacing | 340 mm |
Accessories & related products
Loctite 243 medium-strength threadlocker 10 ml
Temperature resistance (min.): -75 - 200 °C · Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents: 10 ml · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Color: blue · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Type of application: 1K · Alignment time: 600 sec · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m · Area of application: Chemistry
EUR 26.00
EUR 2’600.00/l
swiing® revival screw set shock absorber mounting with axle galvanized | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M8x1.25 (standard thread) · Nominal diameter (thread): 8 mm · Drive: External hexagon · Screw head: Hexagon · Number of components: 17 pcs
EUR 14.10
swiing® revival screws & axle set shock absorber | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Thread type: M8x1.25 (standard thread) · Nominal diameter (thread): 8 mm · Drive: External hexagon · Screw head: Hexagon · Number of components: 17 pcs
EUR 21.20
Shock absorber 34 cm fancy neon yellow
Surface: varnished · Color: black · Color: neon yellow · Damping type: Spring · Adjustable: Yes · Ø outside: 50 mm · Ø Fastening inside: 10 mm · Ø spars: 30 mm · Total length: 375 mm · Mounting type: Nuts & bolts · Hole spacing: 340 mm · Number of fixing points: 2 pcs
EUR 94.80
MKX shock absorber 34 cm black
Manufacturer: MKX · Surface: varnished · Color: black · Damping type: Spring · Adjustable: Yes · Ø outside: 46 mm · Ø Fastening inside: 8 mm · Ø Fastening inside: 10 mm · Ø spars: 24 mm · Total length: 375 mm · Mounting type: Nuts & bolts · Hole spacing: 340 mm · Number of fixing points: 2 pcs
EUR 59.20
Explore categories from Shock absorber & swingarm
Moped fans also bought
Return spring brake plate | Puch Maxi
Spring design: Nose feather · Spring design: Torsion spring · Length spring hook: 50 mm · Ø outside: 30 mm · Leg length: 45 mm · Ø wire: 2.4 mm · Area of application: Original · Material: Spring steel · Area of application: Standard · Total length: 125 mm · Surface: galvanized (blue) · Ø inside: 25.5 mm
EUR 5.80
Magura cable clamp Ø 8 x 15 mm
Ø Cable bushing: 2.3 mm · Manufacturer: Magura · Ø outside: 8 mm · Total length: 15 mm · Material: Brass · Material: Steel · Surface: galvanized (blue) · Surface: nickel-plated · Drive: External hexagon · Drive: Slot · Ø Bundle: 6 mm · Screw head: Hexagon · Width across flats: 7 mm · Thread length: 7 mm · Thread type: M6x1 (standard thread) · Area of application: Standard
EUR 2.95
swiing® revival stud bolt inlet/outlet M6 x 30 (10.9 strength)
Total length: 30 mm · Manufacturer: swiing® revival parts · Thread length: 12 mm · Material: Steel · Nominal diameter (thread): 6 mm · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Diameter: 5.95 mm · Strength class: 10.9
EUR 2.15
NGK CR4 Racing ignition cable & plug High End red / 5 kΩ interference suppressed
Manufacturer: NGK · Material: Silicone · Color: red · Ø cable: 7 mm · Spark plug socket: SAE · Cable available: Yes · Cable length: 500 mm · Suppressed: Yes · Resistance: 5000 Ω · Subcategory: Ignition cable · Subcategory: Spark plug connector
EUR 39.00









