High-end racing clutch suitable for your manual Sachs moped / moped with 503 engine.
The specially designed 4-plate clutch is the non-plus-ultra when it comes to transmitting high power in your Sachs engine.
The four clutch plates allow an enormous amount more torque to actually be transmitted. Since the power is transmitted with less spring force, the clutch is also gentle on other components, making your engine more durable. The clutch basket is made of CNC-machined steel and offers more mass, which has a positive effect on heat resistance, as well as a lower load on the basket, as the steel plates have eight instead of six driver arms. The driver inside is now larger and has several oil holes. In addition, the narrower clutch linings result in faster and better oil displacement.
The compact design means that the clutch can be installed on the Sachs 503 engine without any modifications. To install the high-performance clutch on a 50/2, 50/3, 50/4 engine, a spacer for the gearbox cover must be installed.
We recommend using the clutch with 12 standard springs.
There are three different clutch plates with different properties for the tuning clutch.
- Stage 1 paper (gray): no wear of the steel plates, rather soft clutch behavior
- Stage 2 cork-rubber (red): little wear of the steel plates, sporty ¨bertragungsleistung
- Stage 3 sintered technology (grün): Increased wear of the steel plates, uncompromising transmission performance
You can find the alternative 3 multi-plate clutch, installation tool and replacement plates in the accessories section.
Quality product from the ADDY by Schöb Engineering brand.
Details
| Manufacturer | ADDY |
| Area of application | High End |
| Surface | raw |
| Recording type | Cone mounting |
| Number of slats | 4 pcs |
| Number of springs | 12 pcs |
Suitable for the following models
| Sachs | 503 - 2AL / 2BL |
Accessories & related products
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Area of application: Gearbox lubrication with clutch · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
EUR 11.50
EUR 25.56/l
Hot 
3-plate clutch | Sachs 503, 50/2 (502), 50/3, 50/4
Manufacturer: Made in Europe · Material: Composite materials · Material: Steel · Area of application: Tuning · Number of springs: 9 pcs · Recording type: Interlocking · Ø inside: 29.6 mm · Ø inside: 35.3 mm · Number of slats: 3 pcs · Thickness: 3.8 mm · Ø outside: 110.5 mm
EUR 483.10
ADDY clutch plate (4-plate clutch) red cork-rubber (stage 2) | Sachs 503
Manufacturer: ADDY · Material: Cork · Material: Rubber · Area of application: Tuning · Recording type: Interlocking · Ø inside: 63.5 mm · Ø inside: 68.5 mm · Number of slats: 4 pcs · Ø outside: 94 mm · Thickness: 3.5 mm
EUR 11.50
ADDY clutch plate (4-plate clutch) green sintered technology (stage 3) | Sachs 503
Manufacturer: ADDY · Material: Composite materials · Area of application: Tuning · Recording type: Interlocking · Ø inside: 63.5 mm · Ø inside: 68.5 mm · Number of slats: 4 pcs · Ø outside: 94 mm · Thickness: 3.5 mm
EUR 13.30
Moped fans like you also bought:
BING O-ring Bing SRE & 85, Ø 20 mm
Manufacturer: BING · Material: Rubber · Area of application: Standard · Surface: raw · Place of use: Carburetor · Color: black · Ø inside: 17.2 mm · Ø outside: 20 mm · Cord thickness: 1.4 mm · Number of components: 1 pcs · Pony OEM number: A4281 · Sachs OEM no.: 0250 160 101
EUR 3.40
NSK BO15 shoulder ball bearing 15/40/10 (A4502)
Bearing cage: Brass cage ball-guided · Inner ring width: 10 mm · Manufacturer: NSK · Material: Brass · Area of application: Standard · Material: Steel · Surface: blank · Stock number: BO15 · Bearing type: Shoulder bearing · Width: 10 mm · Ø inside: 15 mm · Ø outside: 40 mm · Ball bearing closed: No · Pony OEM number: A4502 · Sachs OEM no.: 0932 007 001
EUR 29.00
GPO clutch trigger (M27x1.25 / M20x1) | Sachs 502, 503
Thread type: MF20x1 (fine pitch thread) · Thread type: MF27x1.25 (fine pitch thread) · Width across flats (trigger): 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Total length: 57 mm · Strength class: 8.8 · Area of application: (Dis)assembly tool · Material: Steel · Surface: blackened
EUR 23.20
swiing® revival locking plate drive wheel Inox | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A1717)
Manufacturer: swiing® revival parts · Material: Chrome steel (known as Nirosta®) · Number of lobes: 1 pcs · Thickness: 0.5 mm · Pony OEM number: A1717 · Sachs OEM no.: A1717 · Sachs OEM no.: 0246 049 000
EUR 8.05
Large gasket set with shaft seals Engine | Sachs 503
Material: Aluminum · Material: Copper · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Ø outlet inside: 13.3 mm · Hole pattern [mm]: 60 x 40 · Number of components: 14 pcs · Hole spacing inlet: 32 mm
EUR 46.50
ADDY clutch plate (4-plate clutch) red cork-rubber (stage 2) | Sachs 503
Manufacturer: ADDY · Material: Cork · Material: Rubber · Area of application: Tuning · Recording type: Interlocking · Ø inside: 63.5 mm · Ø inside: 68.5 mm · Number of slats: 4 pcs · Ø outside: 94 mm · Thickness: 3.5 mm
EUR 11.50
ADDY clutch plate (4-plate clutch) green sintered technology (stage 3) | Sachs 503
Manufacturer: ADDY · Material: Composite materials · Area of application: Tuning · Recording type: Interlocking · Ø inside: 63.5 mm · Ø inside: 68.5 mm · Number of slats: 4 pcs · Ø outside: 94 mm · Thickness: 3.5 mm
EUR 13.30
Collection only possible with online purchase and appointment.
