High-quality Streetpower racing muffler for your Puch Maxi S moped / moped.
The racing exhaust, which is handmade in Switzerland, is suitable for cylinder kits with a diameter of 43 - 45 mm and a straight outlet.
The tuning exhaust achieves its maximum performance in the upper speed range. The quality of workmanship corresponds to the standard of RHR exhausts and the performance level is roughly on a par with Homoet exhausts.
Note: If you want to continue using your pedal mechanism, you will need a pedal axle extension.
The main pedal can still be used, but may require minor adjustments.
The surface is bare and untreated. A protective coating is required to protect the exhaust system from rust.
The described axle extension, protective coating and other tuning parts can be found in the accessories section.
Branded product from the manufacturer AKOA.
| Manufacturer | AKOA |
| Material | Steel |
| Total length | 940 mm |
| Surface | blank |
| Ø Silencer | 60 mm |
| Mounting type | Nuts |
| Number of fixing points | 3 pcs |
| Ø Flame tube outside | 30 mm |
| Ø Internal connection | 28 mm |
| Exhaust type | Cone / double cone |
| Puch | E50 |
Ratings
Accessories & related products
Simonini exhaust aluminum | Puch
Material: Steel · Total length: 830 mm · Number of fixing points: 1 pcs · Manufacturer: Simonini · Ø outside: 95 mm · Surface: varnished · Ø Silencer: 60 mm · Mounting type: Welded lug · Ø Internal connection: 23 mm · Ø Flame tube outside: 29 mm · Exhaust type: Cone / double cone · Flame tube attachment: Flange
EUR 220.90
HOMOET Exhaust P6 Special (longer center section) | Puch
Manufacturer: HOMOET · Material: Steel · Surface: blank · Total length: 935 mm · Ø Silencer: 50 mm · Flame tube attachment: Flange · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Ø Internal connection: 24 mm · Ø outside: 88 mm · Mounting type: Welded lug · Number of fixing points: 1 pcs
EUR 352.30
Hot 
HOMOET exhaust P6 blank | Puch
Manufacturer: HOMOET · Material: Steel · Surface: raw · Surface: varnished · Color: gray · Mounting type: Tab · Ø Silencer: 50 mm · Ø outside: 88 mm · Total length: 900 mm · Number of fixing points: 2 pcs · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Flame tube attachment: Stud bolts & nuts
EUR 340.30
Not in stock
AKOA Exhaust Streetpower "handmade" | Puch Maxi N
Manufacturer: AKOA · Material: Steel · Surface: blank · Ø Silencer: 60 mm · Total length: 940 mm · Mounting type: Nuts · Ø Internal connection: 28 mm · Number of fixing points: 3 pcs · Ø Flame tube outside: 30 mm · Exhaust type: Cone / double cone
EUR 406.00
Explore categories from Exhaust system
Moped fans also bought
swiing® ingenious gasket outlet 28 mm graphite
Manufacturer: swiing® ingenious parts · Area of application: Tuning · Material: Graphite / Graphite · Reinforced: No · Ø outlet inside: 28 mm · Ø inside: 27.4 mm · Place of use: Exhaust · Thickness: 3 mm · Ø screw holder: 6.6 mm · Hole spacing outlet: 42.5 mm
EUR 8.85
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Number of components: 1 pcs · Ø inside: 106 mm · Number of fixing points: 4 pcs · Ø outside: 116 mm · Thickness: 1 mm · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.65
swiing® ingenious 45 mm cylinder kit CH12 camouflaged | Puch
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Surface: sandblasted · Displacement: 70 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 45 mm · Ø cylinder neck: 48 mm · Inlet window: 23 / 21 x 14 · Thread inlet: M6x1 (standard thread) · Ø outlet inside: 25 mm · Ø piston pin (B): 12 mm · Hole spacing outlet: 42 mm · Outlet type: straight · Number of fixing points: 4 pcs · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Decompressor: No · Hole spacing inlet: 38 mm · Area of application: Tuning
EUR 119.30
Collection only possible with online purchase and appointment.
