High-quality Streetpower racing muffler for your Puch Maxi N moped / moped.
The racing exhaust, which is handmade in Switzerland, is suitable for cylinder kits with a diameter of 43 - 45 mm and a straight outlet.
The tuning exhaust achieves its maximum performance in the upper speed range. The quality of workmanship corresponds to the standard of RHR exhausts and the performance level is roughly on a par with Homoet exhausts.
Note: If you want to continue using your pedal mechanism, you will need a pedal axle extension.
The main pedal can still be used, but may require minor adjustments.
The surface is bare and untreated. A protective coating is required to protect the exhaust system from rust.
The described axle extension, protective coating and other tuning parts can be found in the accessories section.
Branded product from the manufacturer AKOA.
| Manufacturer | AKOA |
| Material | Steel |
| Surface | blank |
| Total length | 940 mm |
| Ø Silencer | 60 mm |
| Ø Internal connection | 28 mm |
| Ø Flame tube outside | 30 mm |
| Exhaust type | Cone / double cone |
| Number of fixing points | 3 pcs |
| Mounting type | Nuts |
| Puch | E50 |
Accessories & related products
Simonini exhaust aluminum | Puch
Ø outside: 95 mm · Manufacturer: Simonini · Material: Steel · Surface: varnished · Ø Silencer: 60 mm · Mounting type: Welded lug · Number of fixing points: 1 pcs · Ø Internal connection: 23 mm · Ø Flame tube outside: 29 mm · Exhaust type: Cone / double cone · Total length: 830 mm · Flame tube attachment: Flange
EUR 218.50
HOMOET Exhaust P6 Special (longer center section) | Puch
Ø outside: 88 mm · Manufacturer: HOMOET · Material: Steel · Surface: blank · Ø Silencer: 50 mm · Mounting type: Welded lug · Number of fixing points: 1 pcs · Ø Internal connection: 24 mm · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Total length: 935 mm · Flame tube attachment: Flange
EUR 348.50
Not in stock
Hot 
HOMOET exhaust P6 blank | Puch
Ø outside: 88 mm · Manufacturer: HOMOET · Material: Steel · Surface: raw · Surface: varnished · Color: gray · Ø Silencer: 50 mm · Mounting type: Tab · Number of fixing points: 2 pcs · Ø Flame tube outside: 28 mm · Exhaust type: Cone / double cone · Total length: 900 mm · Flame tube attachment: Stud bolts & nuts
EUR 336.70
Not in stock
AKOA Exhaust Streetpower "handmade" | Puch Maxi S
Manufacturer: AKOA · Material: Steel · Surface: blank · Ø Silencer: 60 mm · Mounting type: Nuts · Number of fixing points: 3 pcs · Ø Internal connection: 28 mm · Ø Flame tube outside: 30 mm · Exhaust type: Cone / double cone · Total length: 940 mm
EUR 401.70
Not in stock
Moped fans also bought
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Ø wire: 1.7 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Surface: coated · Color: blue · Number of components: 3 pcs · Total length: 28 mm
EUR 21.20
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Manufacturer: Made in Germany · Area of application: Standard · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Cable length: 2200 mm · Nipple length: 5 mm
EUR 2.85
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Thread type: M5x0.8 (standard thread) · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Drive: Slot · Drive: Triangular head · Total length: 47 mm · Total length: 60 mm · Thread length: 35 mm · Thread length: 50 mm
EUR 15.30
Intake manifold Athena AJH Inox
Ø inside: 21 mm · Manufacturer: Made in Netherlands · Material: Chrome steel (known as Nirosta®) · Area of application: Tuning · Mounting type: Screws · Number of fixing points: 4 pcs · Ø External connection: 24 mm · Hole pattern [mm]: 60 x 40 · Total height: 60 mm
EUR 98.00
swiing® revival stud bolts M6x38 inlet/outlet galvanized (10.9 strength)
Manufacturer: swiing® revival parts · Thread type: M6x1 (standard thread) · Diameter: 5.9 mm · Material: Steel · Surface: galvanized (blue) · Total length: 38 mm · Thread length: 11 mm · Thread length: 19 mm · Strength class: 10.9
EUR 2.35
Collection only possible with online purchase and appointment.
