19 mm tuning intake manifold for Puch X30 Sport mopeds / mopeds with Z50 engine and Puch Maxi models which have an E50 engine installed.
The CNC-milled intake manifold is designed for Dell'Orto PHBG carburettors and has a round opening on the cylinder side.
On the Puch X30 it is still possible to fit the original side skirts, but it is not possible to operate the hand choke or fit an air filter. Cable chokes and replicas of the carburetor with service hatch at the bottom cannot be fitted.
| Manufacturer | AKOA |
| Material | Aluminum |
| Ø inside | 19 mm |
| Area of application | Tuning |
| Ø External connection | 24 mm |
| Mounting type | Nuts |
| Hole spacing inlet | 38 mm |
| Total height | 68 mm |
| Height flange center hole | 57 mm |
| Number of fixing points | 2 pcs |
| Camouflaged | No |
| Puch | E50 Z50 (X30 Sport) |
Ratings
Accessories & related products
Dell'Orto 19 mm PHBG CS carburetor hand choke
Nominal diameter: 19 mm · Manufacturer: Dell'Orto · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Racing · Area of application: Tuning · Color: black · Carburetor type: PHBG CS · Width: 70 mm · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Total length: 82 mm · Height: 124 mm · Mounting type: Plug connection clamped · Ø without reducing sleeve: 26 mm · Ø Inside entrance: 19 mm · Ø Internal connection: 24 mm · Ø Output inside: 19 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Nozzle size: 75 · Size of secondary nozzle: 45
EUR 142.30
swiing® revival nozzle set M5 (92 - 110) Dell'Orto SHA, PHBG
Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 10 pcs · Carburetor type: PHBG · Carburetor type: SHA · Carburetor type: SHA (Piaggio) · Nozzle type: Main nozzle · Drive: Slot · Total length: 8 mm · Nozzle thread: M5x0.8 (standard thread) · Nozzle size: 92 · Nozzle size: 94 · Nozzle size: 96 · Nozzle size: 98 · Nozzle size: 100 · Nozzle size: 102 · Nozzle size: 104 · Nozzle size: 106 · Nozzle size: 108 · Nozzle size: 110
EUR 24.80
swiing® ingenious intake manifold 16 mm | Puch X30 NS, NL, Sprinter
Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø inside: 16 mm · Mounting type: Screws · Ø External connection: 20 mm · Number of fixing points: 2 pcs · Hole spacing inlet: 38 mm · Total height: 70 mm · Total length: 48 mm · Area of application: Tuning
EUR 59.20
EUR 47.30
GPO 19.5 mm PHBG AS carburetor hand choke (Dell'Orto replica)
Nominal diameter: 19.5 mm · Manufacturer: GPO · Material: Aluminum · Component group Carburetor: Carburetor complete · Color: black · Carburetor type: PHBG AS · Total length: 71.5 mm · Width: 71 mm · Height: 123 mm · Ø without reducing sleeve: 26 mm · Ø Internal connection: 24 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 32 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 55 · Nozzle thread: M5x0.8 (standard thread) · Nozzle block: 262AU · Camouflaged: No · Nozzle size: 85 · Area of application: Tuning · Size of secondary nozzle: 50
EUR 94.80
swiing® ingenious intake manifold 15 mm | Puch X30 NS, NL, Sprinter
Manufacturer: swiing® ingenious parts · Material: Aluminum · Ø inside: 15 mm · Mounting type: Screws · Ø External connection: 20 mm · Number of fixing points: 2 pcs · Hole spacing inlet: 38 mm · Total height: 70 mm · Total length: 48 mm · Area of application: Tuning
EUR 82.90
AKOA intake manifold 19 mm PHBG angular | Puch X30 NS, NL Z50, E50
Ø inside: 19 mm · Manufacturer: AKOA · Material: Aluminum · Area of application: Tuning · Mounting type: Nuts · Ø External connection: 24 mm · Number of fixing points: 2 pcs · Hole spacing inlet: 38 mm · Total height: 68 mm · Height flange center hole: 57 mm · Camouflaged: No
EUR 82.90
Explore categories from Carburetor & intake system
Moped fans also bought
Dell'Orto 19 mm PHBG CS carburetor hand choke
Nominal diameter: 19 mm · Manufacturer: Dell'Orto · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Racing · Area of application: Tuning · Color: black · Carburetor type: PHBG CS · Width: 70 mm · Ø fuel hose connection: 5.4 mm · Ø fuel hose connection: 6 mm · Total length: 82 mm · Height: 124 mm · Mounting type: Plug connection clamped · Ø without reducing sleeve: 26 mm · Ø Inside entrance: 19 mm · Ø Internal connection: 24 mm · Ø Output inside: 19 mm · Ø Air filter connection: 32 mm · Ø Air filter connection: 60 mm · Air filter connection thread: MF32x1.25 (fine pitch thread) · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Choke nozzle size: 60 · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Nozzle size: 75 · Size of secondary nozzle: 45
EUR 142.30
Hot 
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Area of application: Standard
EUR 2.85
Hot
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Manufacturer: Made in Germany · Number of components: 1 pcs · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Nipple shape: Pears · Area of application: Standard
EUR 2.85
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
