Strengthening plate made of high-quality stainless steel for the three-jaw centrifugal clutch of your Puch moped / moped with E50 engine.
This precision-manufactured stabilizing plate prevents bending of the clutch shoe mounting bolts, especially on tuned engines, and thus ensures flawless operation, even under high loads.
The scope of delivery consists of the cover plate, three M4 Torx countersunk screws and three retaining rings.
Note: For mounting on original clutches, three M4 threads must first be inserted into the mounting bolts of the base plate.
An alternative reinforcement plate for the 2-jaw clutch, complete engine clutches and other individual parts can be found under accessories.
Quality product from the Austrian manufacturer A.S.P - Puch Parts.
| Manufacturer | ASP |
| Material | Chrome steel (colloquially known as stainless steel) |
| Ø inside | 40 mm |
| Thickness | 1.55 mm |
| Puch | E50 |
Accessories & related products
ASP clutch 3-jaw "woven" Aramid | Puch E50
Manufacturer: ASP · Material: Steel · Material addition: Aramid (colloquially known as Kevlar) · Number of jaws: 3 pcs · Thickness: 21.5 mm · Recording type: Cone mounting · Ø outside: 91.5 mm · Number of springs: 6 pcs · Area of application: Racing · Area of application: Tuning
EUR 284.60
Not in stock
Explore categories from Clutch
Moped fans also bought
GPO clutch 3-jaw aluminum | Puch E50
Manufacturer: GPO · Material: Aluminum · Material: Steel · Material addition: Composite materials · Number of springs: 3 pcs · Number of jaws: 3 pcs · Recording type: Cone mounting · Ø inside: 12 mm · Ø inside: 14.6 mm · Thickness: 20.9 mm · Ø outside: 93 mm · Area of application: Original · Area of application: Standard
EUR 59.20
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Ø inside: 4.8 mm · Ø outside: 8.3 mm · Total length: 28 mm · Color: blue · Manufacturer: swiing® ingenious parts · Number of components: 3 pcs · Material: Spring steel · Surface: coated · Area of application: Tuning
EUR 21.20
GPO 45 mm cylinder head tuning | Puch Maxi S, N / X30 NS, NL, N-2AH
Manufacturer: GPO · Total length: 135 mm · Width: 125 mm · Material: Aluminum · Surface: sandblasted · Ø cylinder: 45 mm · Candle thread: short · Height: 55 mm · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: Yes · Area of application: Tuning
EUR 39.00
Airsal gasket set 44 - 45 mm | Puch
Manufacturer: Airsal · Material: Aluminum · Material: Sealing carton · Material: Sealing paper · Ø cylinder: 44 mm · Ø cylinder: 45 mm · Hole pattern [mm]: 44 x 44 mm · Hole spacing inlet: 38 mm · Hole spacing outlet: 42 mm · Number of components: 4 pcs · Decompressor: Yes · Area of application: Tuning
EUR 11.80
swiing® revival Stud Bolt Set M6x106 | Puch
Manufacturer: swiing® revival parts · Diameter: 5.9 mm · Material: Steel · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Total length: 106 mm · Drive: External hexagon · Nominal diameter (thread): 6 mm · Thread length: 13 mm · Thread length: 18.5 mm · Width across flats: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8.80
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Manufacturer: swiing® revival parts · Material: Sealing paper · Color: sand-colored · Thickness: 1 mm · Ø inside: 106 mm · Ø outside: 116 mm · Number of fixing points: 4 pcs · Number of components: 1 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.65
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
