Einbauanleitung Bollag
Throttle cable rocker for your converted Piaggio Wideframe Vespa scooter with Polini CP or Dell'Orto PHBG carburettor round slide
.The sophisticated and thoroughly tested geometric arrangement ensures smooth and controlled opening of the slide. The cable adapter has been designed so that the carburetor can be controlled while retaining the original cable routing.
Fits the following upgraded vehicles:
Vespa V1 - V15, V30 - V33, VM, VN, VU, 150 VL, VB
ACMA 125 (1951-1955), 150 GL (1956-1958)
Motovespa 125N (1953-1958)
Hoffmann Vespa 125 A/B/C
All components required for installation are included in the scope of delivery.
You can download the illustrated installation instructions as a PDF file.
Quality product from the Swiss manufacturer Bollag Motos.
| Manufacturer | Bollag Motos |
| Ø mounting hole | 4.3 mm |
| Component group Carburetor | Adjusting screws, float, etc. |
| Carburetor type | CP, PHBG |
| Number of fixing points | 2 pcs |
Ratings
Accessories & related products
Bollag Motos needle bearing 20/42/18 main shaft | Vespa Wideframe
Manufacturer: Bollag Motos · Material: Steel · Bearing type: Bearing ring · Bearing type: Needle sleeve · Ø inside: 20 mm · Ø outside: 41 mm · Ø outside: 42 mm · Width: 18.1 mm · Dimension needle bearing: 20x42x18
EUR 71.60
Not in stock
Bollag Motos carburetor Polini CP23 without choke | Vespa Wideframe VB1
Nominal diameter: 19 mm · Manufacturer: Bollag Motos · Component group Carburetor: Carburetor complete · Carburetor type: CP · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Total length: 73.5 mm · Height: 135 mm · Nozzle size: 66 · Nozzle size: 75 · Nozzle size: 78 · Nozzle size: 80 · Nozzle size: 82 · Nozzle size: 85 · Nozzle size: 88 · Nozzle size: 90 · Mounting type: Plug connection clamped · Ø Internal connection: 19.8 mm · Ø Air filter connection: 46 mm · Width: 66 mm · Nozzle block: 35-12 · Size of secondary nozzle: 38 · Size of secondary nozzle: 40 · Size of secondary nozzle: 42
EUR 208.90
Not in stock
Moped fans also bought
M10 sealing ring Fiber
Thickness: 1.6 mm · Material: Fiber · Surface: raw · Place of use: Carburetor · Place of use: Motor housing · Ø inside: 10 mm · Ø outside: 13.8 mm · Area of application: Standard · Pony OEM number: A1817 · Pony OEM number: A5650 · Puch OEM number: 27071 · Sachs OEM no.: 0250 042 001 · Sachs OEM no.: 0650 131 000
EUR 1.90
Polini CP 23 mm carburetor (cable choke) rubber flange
Nominal diameter: 23 mm · Manufacturer: Polini · Material: Aluminum · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: CP · Mounting type: Rubber sleeve · Choke control: Cable choke · Nozzle thread: M5x0.8 (standard thread) · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Total length: 71 mm · Nozzle size: 110 · Ø Inside entrance: 42 mm · Ø Output inside: 25 mm · Height: 132 mm · Ø Air filter connection: 47 mm · Width: 66 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Nozzle block: 35-12 · Camouflaged: No · Size of secondary nozzle: 40
EUR 167.10
Surflex clutch plate set 3.3 mm | Sachs 50/2, 50/3, 50/4, 503 2AL/2BL (A3887 / A1908)
Manufacturer: Surflex · Area of application: Original · Material: Steel · Ø inside: 29.7 mm · Ø inside: 36 mm · Ø inside: 46 mm · Recording type: Interlocking · Ø outside: 94.2 mm · Ø outside: 101 mm · Number of slats: 2 pcs · Thickness: 3.3 mm · Pony OEM number: A1908 · Pony OEM number: A3887 · Sachs OEM no.: 0659 010 006
EUR 53.60
Collection only possible with online purchase and appointment.
