Drive belt with 114.0 cm length for your Piaggio Si moped / moped with mono drive.
The following combinations are possible with this mono belt:
| Ø clutch | Ø Pully | Engine position | Pully type |
| 56 mm | 85 mm | Back | swiing® |
| 56 mm | 83 mm | Center - Front | Piaggio (original) |
| 56 mm | 80 mm | Front | Replica |
| 56 mm | 80 mm | Center | swiing® |
| 56 mm | 75 mm | Front | swiing® |
| 66 mm | 70 mm | Center - front | Surflex |
| 66 mm | 70 mm | Center - rear | Replica |
| 66 mm | 70 mm | Center - rear | swiing® |
| 66 mm | 65 mm | Center - front | Replica |
| 66 mm | 65 mm | Center - front | swiing® |
| 66 mm | 60 mm | Front | Replica |
| 66 mm | 60 mm | Front | swiing® |
Note: Check the diameter of your mono clutch and puller before purchasing to ensure that you order the correct drive belt.
You can find more Pully belts, alternative Vario variants as well as drive pulleys and clutches in the accessories section.
Quality product from the German manufacturer BOSCH in original equipment quality.
| Manufacturer | BOSCH |
| Outer width | 10 mm |
| Gearbox type | Mono |
| Rolling circumference | 1140 mm |
| Height | 8.2 mm |
| Belt profile | toothed / serrated |
| Piaggio | Si |
Accessories & related products
GPO clutch 56 mm | Piaggio, Ciao, SI, Bravo, Boxer
Manufacturer: GPO · Material: Steel · Ø Outer pulley: 56 mm · Area of application: Standard · Ø inside: 82 mm · Ø outside: 90 mm · Number of jaws: 3 pcs · Number of springs: 2 pcs · Number of springs: 3 pcs · Piaggio OEM number: 1651505 · Piaggio OEM number: 4503595
EUR 106.70
Moped fans also bought
Hot 
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Cable length: 2200 mm · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Nipple length: 10 mm · Number of components: 1 pcs · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Area of application: Standard · Nipple shape: Pears
EUR 2.85
Inner cable Ø 1.2 mm x 200 cm with barrel nipple Ø 6 mm
Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Brass · Material: Steel · Surface: galvanized (blue) · Ø Stranded wire: 1.2 mm · Nipple shape: Barrel (transverse) · Cable length: 2000 mm · Nipple length: 5.5 mm · Number of components: 1 pcs · Area of application: Standard
EUR 4.05
Not in stock
GPO light switch with wiring harness base chrome version
Cable length: 970 mm · Manufacturer: GPO · Material: Plastic · Surface: chrome-plated · Color: Chrome · Housing material: Steel · Substructure material: Steel · Total length: 50 mm · Width: 30 mm · Functions: High beam (headlights) · Functions: Horn · Functions: Light off · Functions: Low beam · Functions: Motor stop · Height: 25 mm · Number of positions: 3 pcs · Number of cables: 5 pcs · Cable bifurcation to motor: 970 mm · Cable bifurcation to lamp: 180 mm · Cable bifurcation to switch: 420 mm · Ø Handlebars: 22 mm
EUR 20.10
Hot
swiing® revival side protection screw set black | Puch Maxi S
Thread type: M5x0.8 (standard thread) · Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Color: silver · Drive: Slot · Drive: Triangular head · Thread length: 35 mm · Total length: 47 mm · Thread length: 50 mm · Total length: 60 mm
EUR 15.30
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
