Socket axle M11x200 made of galvanized steel for your moped, moped and small motorcycle.
The axle can be used for both front wheels (shortened) and rear wheels.
The complete rear axle set is also equipped with the following parts:
- 2 pcs M11 x 1 nuts (SW17 / 10 mm)
- 2 pcs spacer washer (Ø 20 x 2 mm)
- 2 pcs;ck bearing cone (D19 x d13 mm / SW15)
- 3 pcs M11 x 1 nuts (SW17 / 4 mm)
- 2 pcs ball set à 8 balls (Ø 6.32 mm)
Other threaded shafts and individual parts of this set can be found in the accessories section.
Made by the Italian brand CIF.
Details
| Manufacturer | CIF |
| Material | Steel |
| Surface | galvanized (blue) |
| Shank length | 14.5 mm |
| Thread type | MF11x1 (fine pitch thread) |
| Total length | 200 mm |
| Height | 10 mm, 4 mm, 2 mm |
| Width across flats SW | 17 mm, 15 mm |
| Thread length | 92 mm |
| Ø shaft | 10.3 mm |
| Ball bearing closed | No |
| Ø ball [inch] / [mm] | 1/4" (6.35 mm) |
Suitable for the following models
| Puch | |
| Sachs |
Accessories & related products
Wheel axle set M12x1 x 165 mm front
Thread type: MF12x1 (fine pitch thread) · Manufacturer: Quenching · Material: Steel · Total length: 165 mm · Surface: burnished · Surface: galvanized (blue) · Width: 7 mm · Width: 10.2 mm · Width: 32 mm · Height: 9.9 mm · Ø inside: 12.6 mm · Ø inside: 13.2 mm · Ø shaft: 11.9 mm · Ø outside: 17.4 mm · Ø outside: 19.9 mm · Shank length: 114 mm · Thread length: 25 mm · Thread length: 26 mm · Width across flats SW: 19 mm
EUR 17.40
Loctite 243 medium-strength threadlocker 10 ml
Manufacturer: Loctite · Material to be used: Aluminum · Material to be used: Metal · Material to be used: Steel · Contents [ml]: 10 ml · Color: blue · Hazard warning: Causes serious eye irritation · Hazard warning: Causes skin irritation · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Hazard warning: May cause allergic skin reactions · Hazard warning: May irritate the respiratory tract · Signal word: Attention · Hazard pictogram: GHS07 - Caution dangerous · Hazard pictogram: GHS09 - Hazardous to the aquatic environment · Adhesion: medium strength · Gap dimension (max.): 0.01 mm · Temperature resistance (min.): -75 - 200 °C · Type of application: 1K · Alignment time: 600 sec · Area of application: Chemistry · Breakaway torque (according to material): 3 N/m · Breakaway torque (according to material): 12 N/m · Breakaway torque (according to material): 26 N/m
EUR 25.90
EUR 2’590.00/l
swiing® revival wheel bearing set M11x1
Diameter: 17.95 mm · Ø ball [inch] / [mm]: 7/32" (5.56 mm) · Manufacturer: swiing® revival parts · Material: Steel · Surface: gas nitrided · Ø inside: 25.85 mm · Ø outside: 29 mm · Height: 10.6 mm · Height: 14.15 mm · Width across flats SW: 15 mm · Thread type: MF11x1 (fine pitch thread)
EUR 52.00
Not in stock
Moped fans like you also bought:
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Material lever: Metal · Thread type: MF12x1 (fine pitch thread) · Filter type: Plastic net · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Ø fuel hose connection: 6 mm · Reserve level: 70 mm · Mounting type: Union nut
EUR 11.70
Collection only possible with online purchase and appointment.
