Capacitor with lug and cable for screwing, suitable for old Piaggio Ciao, Si, Bravo and Boxer mopeds / mopeds with breaker ignition.
This capacitor with attached output cable for the ignition coil was fitted as standard on early models between 1967 and 1979. The motor housings can be recognized by the hinged earth connection. In addition, these motors have a 13 mm hole for the rubber plug.
- Mounting type: lug for screwing
- Ø mounting hole: 4.5 mm
- Ø outer: 18 mm
- Height: 27 mm
- Connection type: Cable for screwing
- Length output cable coil: 380 mm
- Capacitance: 0.28 µF (micro Farad - capacitance of the capacitor)
Further parts such as the capacitor felt can be found in the accessories section.
Original Piaggio spare part number: 114471
Branded product from the Italian manufacturer EFFE.
| Ø outside | 18 mm |
| Height | 27 mm |
| Manufacturer | EFFE |
| Capacity | 0.28 µF |
| Mounting type | Tab for screwing |
| Connection type | Cable for screwing |
| Ø mounting hole | 4.5 mm |
| Area of application | Standard |
| Piaggio OEM number | 114471 |
| Piaggio | Ciao - P , SC Bravo / Super Bravo Boxer |
Accessories & related products
Hot 
swiing® ingenious Flywheel Puller M17x1 | Piaggio Ciao, SI, Bravo, Boxer
Total length: 100 mm · Diameter: 12 mm · Diameter: 24 mm · Width across flats trigger: 10 mm · Width across flats trigger: 17 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blackened · Surface: galvanized (blue) · Number of components: 3 pcs · Area of application: (Dis)assembly tool · Thread type: MF12x1.5 (fine pitch thread) · Thread type: MF17x1 (fine pitch thread) · Width across flats Screw: 19 mm
EUR 21.20
swiing® revival condenser with cable | Piaggio Ciao, SI, Bravo, Boxer
Ø outside: 18 mm · Height: 26 mm · Manufacturer: swiing® revival parts · Capacity: 0.28 µF · Mounting type: Tab for screwing · Connection type: Cable for screwing · Ø mounting hole: 4.4 mm · Area of application: Original · Area of application: Standard · Total height: 31 mm · Piaggio OEM number: 102939
EUR 14.10
swiing® revival screw set ignition galvanized | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: Cross recess · Drive: Slot · Screw head: Cylinder head · Screw head: Panhead · Area of application: Standard · Number of components: 14 pcs
EUR 9.40
Moped fans also bought
Nos
Hot
BERU Spark Plug Connector, 1 kΩ, Noise-Suppressed, NOS
Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 11.80
Hot
swiing® ingenious Flywheel Puller M17x1 | Piaggio Ciao, SI, Bravo, Boxer
Total length: 100 mm · Diameter: 12 mm · Diameter: 24 mm · Width across flats trigger: 10 mm · Width across flats trigger: 17 mm · Manufacturer: swiing® ingenious parts · Material: Steel · Surface: blackened · Surface: galvanized (blue) · Number of components: 3 pcs · Area of application: (Dis)assembly tool · Thread type: MF12x1.5 (fine pitch thread) · Thread type: MF17x1 (fine pitch thread) · Width across flats Screw: 19 mm
EUR 21.20
GPO Pulse coil | Piaggio Ciao, SI, Bravo, Boxer
Width: 23.8 mm · Height: 23.8 mm · Manufacturer: GPO · Hole spacing: 50 mm · Number of fixing points: 2 pcs · Ø Internal flywheel: 91 mm · Ø mounting hole: 4.6 mm · Tension: 6 V · Area of application: Standard · Total length: 80 mm · Mounting type: Screws
EUR 29.30
swiing® revival screw set ignition galvanized | Piaggio Ciao, SI, Bravo, Boxer
Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: Cross recess · Drive: Slot · Screw head: Cylinder head · Screw head: Panhead · Area of application: Standard · Number of components: 14 pcs
EUR 9.40
Working late? Evening hours on Thursday until 20:00
