Complete standpipe set suitable for Puch Maxi S & N mopeds / mopeds.
The set consists of left & right fork leg, spring inserts, cover sleeves, rubber springs and sliding bushes.
Ø fork leg: 23 mm
Block for brake anchor plate: 74 x 16/8 x 16 mm (LxWxH)
Total length: 495 mm
Below block to below fork leg: 46 mm
Spring length incl. insert: 210 mm. Insert: 210 mm
Note: This is a cheap reproduction product that cannot be compared with the original fork legs.
The springs are slightly longer, which means that the sliding bush protrudes slightly from the steerer tube. In addition, the welded-on tab on the fork leg may need to be compressed slightly so that it fits into the brake anchor plate.
Accessories for the dip tubes such as reinforced springs can be found in the accessories section.
Good-quality reproduction product from the Asian market.
Details
| Manufacturer | Quenching |
| Material | Steel |
| Surface | chrome-plated |
| Color | Chrome |
| Adjustable | No |
| Total length | 578 mm |
| Distance brake cam to wheel axle center-center | 38 mm |
| Ø spars | 23 mm |
Suitable for the following models
| Puch |
Accessories & related products
EBR standard fork chrome | Puch
Manufacturer: EWC · Material: Steel · Surface: chrome-plated · Color: Chrome · Adjustable: No · Ø spars: 23 mm · Spar end distance (center-center): 140 mm · Ø outer head tube: 26 mm · Ø head tube inside: 22 mm · Head tube length: 180 mm · Total length: 570 mm · Fork bridge - center wheel axle: 383 mm · Distance brake cam to wheel axle center-center: 40 mm · Thread type: MF26x1 (fine pitch thread) · Thread length: 57 mm
EUR 151.20
66HEROES screw M8x25 fork plate Inox | Puch
Manufacturer: 66HEROES · Material: Chrome steel (known as Nirosta®) · Total length: 29.5 mm · Drive: External hexagon · Screw head: Hexagon · Thread type: M8x1.25 (standard thread) · Shank: No · Thread length: 25 mm · Width across flats SW: 17 mm
EUR 10.40
EBR fork with lock black | Puch Maxi
Manufacturer: EWC · Material: Steel · Surface: chrome-plated · Surface: varnished · Thread type: MF26x1 (fine pitch thread) · Adjustable: No · Spar end distance (center-center): 120 mm · Ø outer head tube: 26.2 mm · Total length: 580 mm · Color: Chrome · Color: black · Ø head tube inside: 22.3 mm · Ø spars: 23 mm · Thread length: 57 mm · Head tube length: 180 mm · Fork bridge - center wheel axle: 385 mm · Distance brake cam to wheel axle center-center: 40 mm
EUR 185.70
Not in stock
Moped fans like you also bought:
GPO fork lock | Puch
Ø rotating part: 12 mm · Manufacturer: GPO · Wide locking block: 4.1 mm · Ø outside: 12 mm · Locking block length: 15.3 mm · Material: Brass · Material: Spring steel · Material: Steel · Surface: blank · Width: 17 mm · Total length: 40.8 mm · Length of turned part: 25.6 mm · Ø Pin: 8 mm
EUR 11.50
Fuel tap horizontal M12x1 (with union nut) outgoing at the bottom
Possible lever positions: open / closed / reserve · Thread type: MF12x1 (fine pitch thread) · Material lever: Metal · Filter type: Plastic net · Ø fuel hose connection: 6 mm · Installation direction: horizontal / horizontal · Outlet direction: below · Spare tube shape: curved · Mounting type: Union nut · Reserve level: 70 mm
EUR 11.50
swiing® revival side protection screw set black | Puch Maxi S
Manufacturer: swiing® revival parts · Material: Plastic · Material: Steel · Surface: galvanized (blue) · Surface: raw · Thread type: M5x0.8 (standard thread) · Drive: Slot · Drive: Triangular head · Total length: 47 mm · Total length: 60 mm · Color: silver · Thread length: 35 mm · Thread length: 50 mm
EUR 15.00
GPO steerer tube nut M26x1 closed fork plate chrome
Height: 13.8 mm · Manufacturer: GPO · Ø outside: 28.9 mm · Ø outside: 36.4 mm · Material: Steel · Surface: chrome-plated · Thread type: MF26x1 (fine pitch thread) · Nut type: Cap nut · Drive: External hexagon · Thread depth: 12 mm · Width across flats SW: 30 mm · Area of application: Standard
EUR 11.50
Collection only possible with online purchase and appointment.
