High-quality replica tie rod for Zündungen with small Bosch flywheel, which were installed on Zündapp ZD 10, ZD 30, ZR 10, ZR 20, ZR 30, ZA 25 and ZA 40 mopeds, among others.
Hole spacing (center - center): 46.5 mm
Hole diameter: 4.6 mm
For flywheels with an inner diameter of 80 mm
Original Zündapp spare part number: 249-07.908
Original BOSCH spare part number: 2 204 211 052
Good, inexpensive standard spare part. GPO – GOOD PARTS ONLY.
Details
| Manufacturer | GPO |
| Ø cable holder | 6.1 mm |
| Area of application | Standard, Original |
| Place of use | Internal (in the ignition) |
| Color | black |
| Total length | 69.7 mm |
| Cable length | 68 mm |
| Ø mounting hole | 4.6 mm |
| Hole spacing | 46.5 mm |
| Height | 11 mm |
| Number of fixing points | 2 pcs |
| Ø Internal flywheel | 80 mm |
| Mounting type | Screws |
Suitable for the following models
| Zündapp |
Moped fans like you also bought:
BERU spark plug connector / 1 kΩ interference suppressed
Ø cable: 5 mm · Ø cable: 7 mm · Manufacturer: BERU · Material: Sheet metal (steel) · Color: silver · Spark plug socket: M4 · Cable available: No · Suppressed: Yes · Resistance: 1000 Ω · Component group Carburetor: Spraying · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.20
BERU breaker with cable | Bosch / Ducati
Manufacturer: BERU · Area of application: Original · Area of application: Standard · Material: Steel · Cable available: Yes · Ø axle: 4 mm · Ø mounting hole: 4.5 mm · Cable length: 100 mm · Number of fixing points: 1 pcs · Ø Internal flywheel: 90 mm · Alternative version of the Pony OEM number: A4606 · BOSCH OEM number: 1 217 013 025 · Alternative version of the Sachs OEM number: 0983 106 000 · BERU OEM number: 0 340 100 710
EUR 17.30
BERU breaker with cable (small) | Bosch / Ducati / Minarelli
Manufacturer: BERU · Material: Steel · Ø axle: 4 mm · Ø mounting hole: 4.5 mm · Cable available: Yes · Number of fixing points: 1 pcs · Area of application: Original · Area of application: Standard · Ø Internal flywheel: 80 mm · Morini OEM number: 29 0026 005 · Morini OEM number: 29 0034 005 · Pony OEM number: A2496 · Minarelli OEM number: 82 000 16 · BOSCH OEM number: 2 207 013 005 · BOSCH OEM number: 2 207 110 007 · BERU OEM number: 0 340 100 458 · Fantic OEM number: 320 4500 5150
EUR 22.00
swiing condenser for screwing | Bosch / Ducati
Manufacturer: swiing · Capacity: 0.16 µF · Ø outside: 18 mm · Height: 23 mm · Mounting type: Plug connection clamped · Connection type: Thread for screwing · Thread type: M3x0.5 (standard thread) · Area of application: Original · Area of application: Standard · BOSCH OEM number: 2 207 330 050
EUR 11.50
Hot 
swiing 15 mm carburetor tuning camouflaged | Puch
Manufacturer: swiing · Area of application: Tuning · Component group Carburetor: Carburetor complete · Material: Aluminum · Nominal diameter: 15 mm · Carburetor type: SRE · Total length: 66 mm · Choke control: Hand choke · Width: 50 mm · Height: 95 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m
EUR 93.00
Ignition cable Ø 5 x 450 mm (1A quality)
Ø cable: 5 mm · Manufacturer: Made in Germany · Material: Copper · Material: Plastic · Color: black · Total length: 450 mm · Suppressed: No · Component group Carburetor: Carburetor complete · Pony OEM number: A4603 · Sachs OEM no.: 0965 133 001
EUR 3.95
EUR 8.78/m
Collection only possible with online purchase and appointment.
