Hot 
Special ignition box with two programmable ignition curves for your moped / moped.
The ignition curves can be freely determined on the computer itself. To do this, you need software, which you can find on the HPI homepage (Tune Box) and download free of charge.
For tuning freaks with good technical knowledge.
The ignition box is compatible with all HPI-210 ignitions and is used instead of the usual CDI box.
To make things easier, the switch at the bottom of the accessory can be connected. This makes it easy to switch between the two ignition curves at the touch of a button. We also offer a complete set with all the individual parts you need for programming and use.
Installation:
When using the standard ignition box, the feed rate is set via the flywheel. With the programmable ignition box, however, this is done with the software. For this reason, the rotor must match the marking on the stator at TDC (0° preload). This can be seen in Figure 4.
The corresponding connection cable for the computer and other accessories can be found below in the accessories section.
Branded product from the manufacturer HPI – Horse Power Ignition.
| Ø mounting hole | 7.5 mm |
| Manufacturer | HPI |
| Material | Plastic |
| Color | red |
| Width | 100 mm |
| Total length | 63 mm |
| Height | 28 mm |
| Hole spacing | 80 mm |
| Number of fixing points | 2 pcs |
| Area of application | Performance, Racing, High End, Tuning |
| Universal |
| Puch |
| Sachs |
| Pony / Cilo (Beta 521 & 512) |
| Piaggio |
| Zündapp Belmondo |
Ratings
Accessories & related products
HPI racing ignition 12V with light 60W
Material: Aluminum · Material: Steel · Number of fixing points: 6 pcs · Manufacturer: HPI · Ø Internal flywheel: 61.5 mm · Light coil voltage: 12 V · Direction of rotation: left · Direction of rotation: right · Tension: 12 V · Weight: 340 g · Performance: 60 W · Ø mounting plate: 90 mm · Mounting type: Screws · Ø Flywheel outside: 71.5 mm · Ø cable: 7 mm · Area of application: Tuning
EUR 358.30
HPI flywheel (Bosch/Ducati)
Material: Steel · Manufacturer: HPI · Direction of rotation: left · Direction of rotation: right · Weight: 337 g · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Ø Flywheel outside: 71.5 mm · Cone length: 28 mm · Thread type: MF27x1 LH (fine/left-hand thread) · Cone ratio: 1:5
EUR 114.60
HPI stator ignition
Material: Aluminum · Color: black · Number of fixing points: 6 pcs · Ø inside: 27.5 mm · Manufacturer: HPI · Ø outside: 90 mm · Number of cables: 4 pcs · Surface: anodized · Cable length: 640 mm · Tension: 12 V · Performance: 60 W · Ø bolt circle: 80 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning
EUR 179.10
HPI racing ignition set 12V with light 60W | Puch X30 Velux / Sachs 503 / Zündapp Belmondo
Ø cable: 7 mm · Manufacturer: HPI · Manufacturer: swiing · Area of application: Tuning · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Tension: 12 V · Performance: 60 W
EUR 447.90
Moped fans also bought
Hot
BERU spark plug connector / 1 kΩ interference suppressed
Manufacturer: BERU · Material: Sheet metal (steel) · Spark plug socket: M4 · Cable available: No · Color: silver · Suppressed: Yes · Resistance: 1000 Ω · Subcategory: Spark plug connector · Ø cable: 5 mm · Ø cable: 7 mm · Pony OEM number: A2099 · Sachs OEM no.: 0265 100 00
EUR 10.50
NGK B5ES spark plug long thread
Manufacturer: NGK · Candle designation: B5ES · Candle thread type: long · Spark plug socket: M4 · Spark plug socket: SAE · Suppressed: No · Thread type: MF14x1.25 (fine pitch thread) · Width across flats: 21 mm · Area of application: Original · Area of application: Standard
EUR 7.75
swiing® ingenious 100 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Number of fixing points: 4 pcs · Ø mounting hole: 5 mm · Ø inside: 71.8 mm · Manufacturer: swiing® ingenious parts · Ø outside: 117 mm · Thickness: 1.8 mm · Material: Chrome steel (colloquially known as stainless steel) · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Surface: blank · Weight: 100 g · Ø bolt circle: 101 mm
EUR 23.80
swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Ø mounting hole: 6 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Weight: 87 g · Color: red · Height: 13.5 mm · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Ø inside: 39 mm · Number of fixing points: 10 pcs · Ø outside: 120 mm
EUR 74.70
Collection only possible with online purchase and appointment.
