Complete set of 0.8 mm thick steel disk springs for the HRT SX50 KTM clutch on your Puch moped / moped with E50 engine.
The disk springs are of the highest quality and precisely defined hardness, so that each disk has the same pressure.
The pairs of spring washers are stacked against each other over the spacer sleeves. Depending on the requirements, more or fewer pairs can be stacked in order to adapt the spring tension to the demands of the engine.
As a basic setting for the first assembly, we recommend the following structure of the spring assemblies: ()()()()()()()(
respective total dimension of the 13 stacked disk springs approx. 15.5 mm.
| Ø outside | 15 mm |
| Thickness | 0.8 mm |
| Material | Steel |
| Ø inside | 8.2 mm |
| Number of springs | 48 pcs |
| Area of application | Racing, High End |
| Puch | E50 |
Accessories & related products
HRT screw set clutch hub KTM SX50 (strength 10.9) | Puch E50
Number of components: 3 pcs · Material: Steel · Surface: blackened · Drive: External hexagon · Screw head: Hexagon · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Thread length: 25 mm · Width across flats: 10 mm
EUR 10.60
Explore categories from Clutch
Moped fans also bought
swiing® revival clutch plates (2 pcs.) | Sachs 50/2, 503 2AL/2BL (A3887)
Material: Composite materials · Material: Steel · Thickness: 3.3 mm · Manufacturer: swiing® revival parts · Area of application: Standard · Ø outside: 93.7 mm · Recording type: Interlocking · Number of slats: 2 pcs · Ø inside: 29.7 mm · Ø inside: 36 mm · Pony OEM number: A3887 · Sachs OEM no.: 0659 010 006
EUR 31.40
swiing® revival gasket gearbox cover engine 1 mm | Puch E50
Ø inside: 106 mm · Ø outside: 116 mm · Manufacturer: swiing® revival parts · Number of components: 1 pcs · Material: Sealing paper · Color: sand-colored · Number of fixing points: 4 pcs · Thickness: 1 mm · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 4.65
swiing® revival thrust washer set Ø 15 / 17 mm | Puch E50
Ø outside: 22 mm · Ø outside: 24 mm · Thickness: 1.1 mm · Thickness: 1.3 mm · Thickness: 1.5 mm · Thickness: 1.7 mm · Manufacturer: swiing® revival parts · Material: Steel · Surface: hardened & ground · Ø inside: 15 mm · Ø inside: 17 mm · Area of application: Standard
EUR 46.20
Polini CP 21 mm carburetor (hand choke) rubber flange
Width: 66 mm · Manufacturer: Polini · Component group Carburetor: Carburetor complete · Material: Aluminum · Nominal diameter: 21 mm · Carburetor type: CP · Total length: 71 mm · Nozzle thread: M5x0.8 (standard thread) · Mounting type: Rubber sleeve · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Nozzle size: 100 · Height: 132 mm · Ø Inside entrance: 42 mm · Ø Output inside: 22.5 mm · Ø Air filter connection: 47 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Nozzle block: 35-12 · Camouflaged: No · Size of secondary nozzle: 40
EUR 166.00
Not in stock
Motorex ATF gear oil "Dexron III" 1 L
Temperature resistance (min.): 170 °C · Manufacturer: Motorex · Oil type: ATF Dexron 3 (DEXIII) · Contents: 1000 ml · Gearbox type: Automatic machine · Hazard warning: Harmful to aquatic organisms (with long-term effects) · Area of application: Gearbox lubrication with clutch
EUR 25.50
EUR 25.50/l
Working late? Evening hours on Thursday until 20:00
