Clutch drum of the Primärantrieb for 2-speed manual Z50 engines of Puch X30 NS, NL mopeds / mopeds.
This clutch basket is used in combination with primary drive sprockets, which have 69 teeth.
Number of teeth: 19
Toothing: helical
Total height: 26.6 mm
Number of plates: Two-plate clutch
Note: There may be a slight singing after installation until the tooth flanks are ground in cleanly on the primary gear.
You can find the sliding blocks, thrust washers and other parts in the accessories section.
Original Puch spare part number: 350.1.12.002.2
| Manufacturer | HS-Retro |
| Material | Steel |
| Toothing type | helical toothed |
| Number of teeth | 19 pcs |
| Height | 26.6 mm |
| Ø inside | 17 mm |
| Ø outside | 74.8 mm |
| Area of application | Original, High End |
| Puch OEM number | 350.1.12.002.2 |
| Puch | Z50 (X30 Sport) Z50 (X30 Velux) |
Accessories & related products
Surflex clutch plate set | Puch Z50
Material: Composite materials · Material: Steel · Thickness: 2.75 mm · Manufacturer: Surflex · Ø outside: 69.6 mm · Ø outside: 74.8 mm · Ø inside: 46.3 mm · Ø inside: 51.3 mm · Recording type: Interlocking · Area of application: Original · Number of slats: 2 pcs
EUR 41.30
Serrated lock washer M10 galvanized
Material: Steel · Surface: galvanized (blue) · Ø inside: 4.5 mm · Ø inside: 5.5 mm · Ø inside: 6.35 mm · Ø inside: 7.4 mm · Ø inside: 10.8 mm · Ø inside: 12.8 mm · Thread size: M10 · Thread size: M12 · Thread size: M4 · Thread size: M5 · Thread size: M6 · Thread size: M7 · Thread size: M8
EUR 0.35
Moped fans also bought
swiing® revival gasket set Z50 engine | Puch X30 NS / NL
Manufacturer: swiing® revival parts · Material: Sealing paper · Ø outlet inside: 22 mm · Number of components: 10 pcs · Hole spacing inlet: 32 - 38 mm · Area of application: Standard · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44
EUR 23.50
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Oil type: GL4 · Viscosity (SAE): 80W · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C · Area of application: Gearbox lubrication with clutch
EUR 11.70
EUR 26.00/l
ESJOT drive chain 415H (reinforced) 114L (1A quality)
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: ESJOT · Surface: blank / oiled · Color: gray · Material: Steel · Number of chain links: 114 pcs · Rolling circumference: 1448 mm · Chain lock type: Spring lock · Ø bore: 4.05 mm · Ø Pin: 4 mm
EUR 22.30
swiing® ingenious clutch spring reinforced +40% | Puch Z50
Spring design: Pressure spring · Ø wire: 4.5 mm · Manufacturer: swiing® ingenious parts · Material: Spring steel · Area of application: Tuning · Surface: coated · Color: red · Number of components: 1 pcs · Ø outside: 39 mm · Ø inside: 30 mm · Total length: 23.5 mm
EUR 28.30
Collection only possible with online purchase and appointment.
