Gearwheel of the primary drive for 2-speed manual Z50 engines of Puch X30 NS, NL mopeds / mopeds.
This drive wheel is used in combination with clutch pistons, which have 19 teeth.
Number of teeth: 69
Toothing: helical
Mounting: 3-prong profile
Note: There may be a slight singing after installation until the tooth flanks are ground in cleanly on the clutch basket.
The fastening nut and other parts can be found under accessories.
Original Puch spare part number: 349.3.13.200.1
| Manufacturer | HS-Retro |
| Material | Steel |
| Ø inside | 12.5 mm |
| Toothing type | helical toothed |
| Ø outside | 95 mm |
| Recording type | 3-tooth splined shaft holder |
| Number of teeth | 69 pcs |
| Puch OEM number | 349.3.13.200.1 |
| Puch | Z50 (X30 Sport) |
Ratings
Accessories & related products
HS-Retro bearing ring 24/32/7.5 large Z50 (1A quality) | Puch X30 NS, NL
Manufacturer: HS-Retro · Material: Steel · Surface: hardened & ground · Ø inside: 23.8 mm · Ø outside: 31.98 mm · Width: 7.55 mm · Area of application: High End · Area of application: Original · Puch OEM number: 329.1.13.065.1
EUR 70.40
HS-Retro bearing race 19.4/28.1/7.5 small Z50 (1A quality) | Puch X30 NS, NL
Manufacturer: HS-Retro · Material: Steel · Surface: hardened & ground · Ø inside: 19.44 mm · Ø outside: 28.1 mm · Width: 7.5 mm · Area of application: High End · Area of application: Original · Puch OEM number: 329.1.13.010.1
EUR 53.60
HS-Retro clutch basket 19 teeth 2-plate version | Puch Z50
Manufacturer: HS-Retro · Material: Steel · Ø inside: 17 mm · Toothing type: helical toothed · Ø outside: 74.8 mm · Number of teeth: 19 pcs · Area of application: High End · Area of application: Original · Height: 26.6 mm · Puch OEM number: 350.1.12.002.2
EUR 191.00
Explore categories from Gearbox & housing (motor)
Moped fans also bought
Inox
Hot 
GPO license plate holder Inox (CH version)
Height: 5.3 mm · Number of fixing points: 2 pcs · Ø mounting hole: 5 mm · Manufacturer: GPO · Total length: 145 mm · Color: silver · Material: Chrome steel (colloquially known as stainless steel) · Mounting type: Nuts & bolts · Width: 105 mm · Thread type: M5x0.8 (standard thread) · Thread length: 8 mm · Hole spacing: 30 mm · Hole spacing: 50 mm
EUR 13.00
Not in stock
Airsal 46 mm cylinder kit straight exhaust | Puch
Nominal diameter: 46 mm · Number of fixing points: 4 pcs · Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Area of application: Tuning · Crankshaft stroke: 43 mm · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 38 mm · Ø piston pin (B): 12 mm · Outlet type: straight · Hole spacing outlet: 42 mm · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Camouflaged: No
EUR 238.80
Surflex clutch plate set | Puch Z50
Ø inside: 46.3 mm · Ø inside: 51.3 mm · Manufacturer: Surflex · Ø outside: 69.6 mm · Ø outside: 74.8 mm · Material: Composite materials · Material: Steel · Area of application: Original · Recording type: Interlocking · Number of slats: 2 pcs · Thickness: 2.75 mm
EUR 41.70
swiing® ingenious clutch spring reinforced +40% | Puch Z50
Spring design: Pressure spring · Ø wire: 4.5 mm · Manufacturer: swiing® ingenious parts · Surface: coated · Color: red · Number of components: 1 pcs · Material: Spring steel · Ø inside: 30 mm · Total length: 23.5 mm · Ø outside: 39 mm · Area of application: Tuning
EUR 28.60
HS-Retro clutch basket 19 teeth 2-plate version | Puch Z50
Manufacturer: HS-Retro · Material: Steel · Ø inside: 17 mm · Toothing type: helical toothed · Ø outside: 74.8 mm · Number of teeth: 19 pcs · Area of application: High End · Area of application: Original · Height: 26.6 mm · Puch OEM number: 350.1.12.002.2
EUR 191.00
Collection only possible with online purchase and appointment.
