Base plate suitable for the three-jaw centrifugal clutch of Puch mopeds / mopeds with E50 engines.
The clutch carrier is made of steel and is extended. The mounting pins can be secured with circlips. In addition, M4 threads are cut into the pins so that a reinforcement plate can be fitted.
The aforementioned plate, clutch linings, complete clutches and the clutch hub without threaded holes can be found in the accessories section.
Original Puch spare part number: 349.1.12.504.2
| Ø inside | 11.85 mm |
| Ø outside | 92.6 mm |
| Material | Steel |
| Area of application | Standard |
| Recording type | Cone mounting |
| Number of jaws | 3 pcs |
| Thickness | 19.1 mm |
| Puch | E50 |
Ratings
Accessories & related products
swiing® ingenious clutch springs reinforced (+20%) | Puch E50
Spring design: Pressure spring · Ø wire: 1.7 mm · Ø inside: 4.8 mm · Manufacturer: swiing® ingenious parts · Ø outside: 8.3 mm · Total length: 28 mm · Number of components: 3 pcs · Material: Spring steel · Area of application: Tuning · Color: blue · Surface: coated
EUR 21.20
Hot 
Jammer racing clutch special 65 ccm and more | Puch E50
Manufacturer: Jammer · Material: Steel · Material addition: Steel · Number of jaws: 3 pcs · Recording type: Cone mounting · Number of springs: 3 pcs · Ø outside: 92.5 mm · Thickness: 19 mm · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning
EUR 225.00
Not in stock
HK clutch "Racing" (with additional weight) Aramid | Puch E50
Manufacturer: HK Clutches · Material: Aluminum · Material: Chrome steel (colloquially known as stainless steel) · Material: Steel · Material addition: Composite materials · Number of springs: 3 pcs · Number of jaws: 3 pcs · Ø inside: 12 mm · Ø inside: 14.6 mm · Recording type: Cone mounting · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Thickness: 21.2 mm · Ø outside: 93 mm
EUR 497.50
Hot
DMP clutch "Racing" aluminum reinforced | Puch E50
Manufacturer: DMP · Ø outside: 94 mm · Area of application: High End · Area of application: Performance · Area of application: Racing · Material: Steel · Area of application: Tuning · Material addition: Chrome steel (colloquially known as stainless steel) · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Thickness: 22 mm
EUR 142.10
Moped fans also bought
GPO gasket set | Puch E50
Manufacturer: GPO · Number of components: 7 pcs · Material: Aluminum · Material: Fiber · Material: Sealing carton · Material: Sealing paper · Area of application: Standard · Ø outlet inside: 19.9 mm · Hole spacing inlet: 32 - 38 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Decompressor: Yes
EUR 11.70
swiing® ingenious needle roller bearing 12/15/16.2 "Racing" silver cage
Bearing type: Needle roller and cage assembly · Ø inside: 12 mm · Manufacturer: swiing® ingenious parts · Ø outside: 15 mm · Bearing cage: Silver cage · Width: 16.2 mm · Dimension needle bearing: 12/15 x 16.2 · Tomos OEM number: 035548
EUR 16.50
Not in stock
swiing® revival gasket gearbox cover engine 0.5 mm | Puch E50
Ø inside: 106 mm · Manufacturer: swiing® revival parts · Ø outside: 116 mm · Number of components: 1 pcs · Material: Sealing paper · Color: sand-colored · Thickness: 0.5 mm · Number of fixing points: 4 pcs · Alternative version of the Puch OEM number: 349.1.10.349.1
EUR 3.45
Collection only possible with online purchase and appointment.
