Complete LELEU spoke wheel hub with brake anchor plate and axle for your Puch Maxi N chopper as well as X30 chopper moped / moped with 14" rim.
The brake anchor plate was manufactured in a small series with the old casting tools and therefore corresponds to the original from the past.
The wheel hub comes from new production, is precisely manufactured and impresses with its high-quality workmanship. The hub is equipped with grooved ball bearings and an M11 axle.
The 28 spoke holes with a diameter of 3.7 mm are also suitable for 2.9 mm stainless steel spokes.
Note: Unfortunately, the brake pads are something that didn't convince us. We recommend replacing these with a high-quality alternative such as those in the accessories section.
| Material | Aluminum |
| Manufacturer | LELEU |
| Area of application | Original |
| Axle length | 160 mm |
| Ø outside | 115 mm |
| Ø inside | 80 mm |
| Ø bolt circle | 105 mm |
| Ø axle | 11 mm |
| Ø drum | 80 mm |
| Thread type | MF10x1 (fine pitch thread) |
| Number of spoke holes | 28 pcs |
| Ø spoke hole | 3.7 mm |
| Puch |
Ratings
Accessories & related products
swiing® ingenious assembly tool clasp brake shoe
Manufacturer: swiing® ingenious parts · Material: Steel · Area of application: Special tool · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Total length: 41.1 - 65 mm · Ø outside: 10 mm · Number of components: 3 pcs · Thread length: 30 mm · Width across flats: 8 mm
EUR 19.70
Hot 
LELEU wheel hub spoke wheel front 36 holes with anchor plate & axle | Puch
Manufacturer: LELEU · Material: Aluminum · Area of application: Original · Ø axle: 11 mm · Axle length: 160 mm · Ø drum: 80 mm · Ø outside: 115 mm · Thread type: MF11x1 (fine pitch thread) · Number of spoke holes: 36 pcs · Ø spoke hole: 3.7 mm
EUR 191.00
Rear wheel hub spoke 36 holes with axle (1A quality) | Puch Maxi, X30 NG-2AH
Color: silver · Material: Aluminum · Area of application: Standard · Ø axle: 12 mm · Ø drum: 80 mm · Ø outside: 115 mm · Ø bolt circle: 105.5 mm · Width: 105 mm · Total length: 185 mm · Thread type: FG34.8 (1.37" 24G) · Thread type: M5x0.8 (standard thread) · Thread type: MF12x1 (fine pitch thread) · Thread length: 12 mm · Thread length: 17 mm · Thread length: 43 mm · Number of spoke holes: 36 pcs · Ø spoke hole: 3.7 mm · Number of fixing points: 6 pcs · Puch OEM number: 349.5.41.803.1
EUR 113.40
Not in stock
Moped fans also bought
Side stand chrome | Puch
Material: Steel · Color: Chrome · Color: black · Total length: 345 mm · Number of fixing points: 2 pcs · Manufacturer: Made in Portugal · Surface: chrome-plated · Surface: powder-coated · Adjustable: Yes · Length pivot point - floor: 220 mm · Mounting type: Screwed clamp
EUR 23.30
GPO 19" spoke set incl. nipple (2.9 x 212 mm) Inox
Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Nipple length: 14 mm · Manufacturer: GPO · Surface: raw · Quantity: 36 pcs · Length from hook: 212 mm · Ø spoke head: 5.35 mm · Thread length: 11 mm · Ø spoke: 2.9 mm · Nominal diameter (thread): 3.15 mm · Ø nipple head: 8.1 mm · Ø Nipple neck: 5 mm · Hook length: 9.8 mm · Hook angle: 95 °
EUR 71.60
swiing® revival swabs short Bing SRE, SSN, SSE, SRF, 85, SRA
Total length: 25 mm · Ø inside: 2.5 mm · Manufacturer: swiing® revival parts · Ø outside: 8 mm · Component group Carburetor: Adjusting screws, float, etc. · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRE · Carburetor type: SRF · Carburetor type: SSE · Carburetor type: SSN · Carburetor type: 85 · Pony OEM number: A2430 · Sachs OEM no.: 0281 109 000
EUR 4.65
Speedo drive 19" right | Puch Velux
Ø mounting hole: 10 mm · Manufacturer: Made in Germany · Ø outside: 41 mm · Material: Aluminum · Color: gray · Place of use: right · 4-edge speedometer cable: 2.6 mm · Overall width outside: 50 mm · Ø axle: 10 mm · Thread type: MF10x1 (fine pitch thread) · Wheel size: 19 " · Total height: 48 mm
EUR 53.60
Collection only possible with online purchase and appointment.
