Clutch springs suitable for the KTM SX50 clutch for Puch Maxi mopeds with E50 engine.
Specially developed for racing purposes. Designed for the highest loads.
The set consists of 3 springs and 3 washers.
The clutches engage at approx. 7000 - 9000 rpm, depending on the oil, etc.
In order to change the clutch engagement speed, the enclosed shims can be installed. This increases the clutch engagement speed by approx. 500 rpm.
The springs are made of stainless steel and can withstand temperatures of up to 240 degrees.
You can find other spring strengths in our range.
Details
| Spring design | Pressure spring |
| Manufacturer | MBR |
| Material | Spring steel |
| Color | red |
| Number of components | 6 pcs |
| Area of application | Racing |
Suitable for the following models
| Puch | E50 |
Moped fans like you also bought:
swiing nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
Manufacturer: swiing · Material: Brass · Component group Carburetor: Spraying · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Drive: Slot · Quantity: 6 pcs · Nozzle type: Main nozzle · Total length: 6 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74
EUR 18.80
NGK CR6 Racing ignition cable & plug High End red
Material: Rubber · Cable length: 1000 mm · Manufacturer: NGK · Cable available: Yes · Suppressed: Yes · Resistance: 5000 Ω · Component group Carburetor: Ignition cable · Component group Carburetor: Spark plug connector · Ø cable: 7 mm · Color: red
EUR 47.20
swiing® revival stud bolt set M6 x 106 mm | Puch
Material: Steel · Surface: galvanized (blue) · Manufacturer: swiing® revival parts · Diameter: 5.9 mm · Total length: 106 mm · Drive: External hexagon · Thread length: 13 mm · Thread length: 18.5 mm · Thread type: M6x1 (standard thread) · Width across flats SW: 10 mm · Alternative version of the Puch OEM number: 360.1.10.034.1
EUR 8.75
Athena 38 mm cylinder kit incl. diaphragm | Puch
Material: Aluminum · Surface: sandblasted · Manufacturer: Athena · Camouflaged: No · Displacement: 50 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 38 mm · Thread inlet: M5x0.8 (standard thread) · Area of application: Tuning · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Hole spacing outlet: 42 mm · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44
EUR 236.70
Collection only possible with online purchase and appointment.
