Set 15 mm tuning intake manifold suitable for your Puch Maxi S / N moped / moped with 1-speed E50 engine.
From the factory, the original counterpart with 14 mm diameter and round intake window was installed on Austrian Puch mopeds.
The tuning intake manifold is therefore additionally provided with an embedded «14» for camouflage. When installed, the intake manifold is therefore visually indistinguishable from the original.
The cylinder-side shape corresponds to the intake window shape used by various racing engines, such as those used by swiing® or Airsal, among others.
| Manufacturer | swiing® ingenious parts |
| Material | Aluminum |
| Ø inside | 15 mm |
| Ø External connection | 20 mm |
| Hole spacing inlet | 38 mm |
| Number of fixing points | 2 pcs |
| Mounting type | Nuts |
| Total height | 52 mm |
| Height flange center hole | 40 mm |
| Camouflaged | Yes |
| Puch | E50 |
Ratings
Accessories & related products
Hot 
swiing® ingenious 15 mm carburetor camouflaged | Puch
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Total length: 66 mm · Mounting type: Plug connection clamped · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Choke control: Hand choke · Carburetor type: SRE · Ø fuel hose connection: 6 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Width: 50 mm · Height: 95 mm · Mixed oil connection: No · Vacuum connection: No · Area of application: Tuning · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
EUR 94.80
Hot
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Ø inside: 15 mm · Ø External connection: 20 mm · Hole spacing inlet: 38 mm · Number of fixing points: 2 pcs · Mounting type: Screws · Height flange center hole: 43 mm · Total height: 53 mm · Total length: 46 mm · Camouflaged: Yes · Puch OEM number: 349.2.15.330.1 · Puch OEM number: 349.2.15.130.1
EUR 41.40
swiing® revival 14 mm intake manifold round inlet (AT version) | Puch E50
Manufacturer: swiing® revival parts · Camouflaged: No · Material: Aluminum · Ø inside: 14 mm · Ø External connection: 20 mm · Mounting type: Flange · Hole spacing inlet: 38.5 - 38 mm · Number of fixing points: 2 pcs · Total height: 52.5 mm · Height flange center hole: 42.5 mm · Total length: 45.5 mm · Area of application: Original
EUR 41.40
EUR 29.50
swiing® ingenious 4 mm intake gasket 15 mm intake manifold square | Puch E50, Z50, ZA50
Place of use: Admission · Manufacturer: swiing® ingenious parts · Material: Oiled paper · Material: Phenolic resin (colloquially known as Bakelite) · Ø inside: 15 mm · Nominal diameter: 15 mm · Thickness: 4 mm · Hole spacing inlet: 38 mm · Ø screw holder: 6.2 mm
EUR 8.90
Explore categories from Carburetor & intake system
Moped fans also bought
Airsal 45 mm cylinder kit 70 ccm camouflaged | Puch
Manufacturer: Airsal · Material: Aluminum · Surface: sandblasted · Nominal diameter: 45 mm · Camouflaged: Yes · Crankshaft stroke: 43 mm · Displacement: 70 ccm · Hole spacing inlet: 38 mm · Ø cylinder neck: 48 mm · Ø outlet inside: 25 mm · Ø piston pin (B): 12 mm · Inlet window: 23.5 / 20 x 15 · Hole spacing outlet: 42 mm · Thread inlet: M6x1 (standard thread) · Decompressor: Yes · Outlet type: straight · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Number of fixing points: 4 pcs · Area of application: Tuning
EUR 118.50
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Screw head: Lens head · Manufacturer: Magura · Material: Brass · Material: Steel · Surface: nickel-plated · Thread type: M4x0.7 (standard thread) · Ø Cable bushing: 1.6 mm · Drive: Slot · Total length: 6 mm · Thread length: 4 mm · Ø outside: 5 mm · Number of components: 2 pcs
EUR 2.35
Side stand chrome | Puch Maxi S / N, Supermaxi LG1 / LG2, X30 NS / NL / NG-2AH, P1
Manufacturer: Made in Portugal · Material: Steel · Surface: chrome-plated · Surface: powder-coated · Color: Chrome · Color: black · Total length: 345 mm · Length pivot point - floor: 220 mm · Mounting type: Screwed clamp · Number of fixing points: 2 pcs · Adjustable: Yes
EUR 23.10
MBR clutch basket Racing 21 teeth angled | Puch E50
Manufacturer: MBR · Material: Steel · Color: silver · Recording type: Interlocking · Toothing type: helical toothed · Number of teeth: 21 pcs · Ø Receptacle: 31 mm · Ø inside: 15 mm · Ø inside: 17 mm · Ø outside: 99.5 mm · Height: 49.2 mm · Area of application: Tuning
EUR 213.50
PROMA Exhaust Grand Prix | Puch
Manufacturer: PROMA · Material: Aluminum · Material: Steel · Surface: varnished · Ø outside: 73 mm · Total length: 1000 mm · Color: graphite colors · Color: silver · Ø Silencer: 60 mm · Ø Internal connection: 22 mm · Ø Flame tube outside: 25 mm · Exhaust type: Cone / double cone · Mounting type: Welded lug · Number of fixing points: 3 pcs · Flame tube attachment: Flange
EUR 162.40
Attention: new opening hours from 16.02.2026 & new evening sale on Thursday 17:30-20:00
