Hot 
World-class racing exhaust for your Puch Maxi S & N moped / moped with E50 engine and correspondingly large racing cylinder with exhaust port.
This is a thoroughbred racing muffler with an impressive resonance kick that delivers brute power directly to the rear wheel. The resonance pot dominates over the entire power band, pulls powerfully and showed noticeably more energy in endurance tests compared to comparable alternatives.
The racing wing is handmade from 0.8 mm thick material and leaves nothing to be desired in terms of performance, quality and accuracy of fit. The 3-point mounting of the muffler with additional reinforcement ensures stability and significantly reduces the risk of fatigue fracture. With a protective coating applied at the factory, the racing pot is ready for immediate installation.
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Surface | varnished |
| Ø Silencer | 60 mm |
| Exhaust type | Cone / double cone |
| Puch | E50 |
Ratings
Accessories & related products
Parmakit 47 mm cylinder kit without head | Puch
Nominal diameter: 47 mm · Manufacturer: Parmakit · Material: Aluminum · Surface: sandblasted · Displacement: 75 ccm · Crankshaft stroke: 43 mm · Ø cylinder neck: 49.5 mm · Ø outlet inside: 28 mm · Inlet window: 29 x 16 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 46 mm · Ø piston pin (B): 12 mm · Outlet type: slanted · Hole spacing outlet: 45 mm · Thread outlet: M6x1 (standard thread) · Number of fixing points: 4 pcs · Hole pattern [mm]: 44 x 44 · Decompressor: No · Camouflaged: No · Area of application: Tuning
EUR 357.30
HK Clutch "Racing" Kickstarter Aramid | Puch E50
Ø inside: 13.6 mm · Ø inside: 14.6 mm · Manufacturer: HK Clutches · Material: Steel · Material addition: Aluminum · Recording type: Cone mounting · Number of jaws: 3 pcs · Number of springs: 3 pcs · Thickness: 20.3 mm · Ø outside: 93 mm · Area of application: Racing
EUR 357.30
Gilardoni italkit 47 mm cylinder kit without cylinder head | Puch
Manufacturer: Gilardoni italkit · Material: Aluminum · Camouflaged: No · Surface: sandblasted · Area of application: Tuning · Displacement: 75 ccm · Crankshaft stroke: 43 mm · Nominal diameter: 47 mm · Ø cylinder neck: 51 mm · Ø outlet inside: 26.5 mm · Ø Inlet inside: 18.3 mm · Number of fixing points: 4 pcs · Inlet window: 38.5 x 25.8 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 35.5 mm · Hole spacing inlet: 60 mm · Ø piston pin (B): 12 mm · Hole spacing outlet: 42 mm · Hole pattern [mm]: 44 x 44 · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Decompressor: No
EUR 242.00
PVL internal rotor ignition clockwise without keyway
Manufacturer: PVL · Material: Aluminum · Direction of rotation: right · Ø mounting plate: 90 mm · Area of application: High End · Area of application: MX · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of fixing points: 3 pcs · Mounting type: Screws
EUR 288.10
swiing® ingenious EVO ignition | Puch E50, Z50
Manufacturer: swiing® ingenious parts · Ø Internal flywheel: 63.5 mm · Area of application: High End · Area of application: Racing · Area of application: Tuning · Tension: 12 V · Light coil voltage: 12 V · Performance: 60 W · Direction of rotation: any · Ø mounting plate: 90 mm · Mounting type: Screws · Ø Flywheel outside: 75 mm · Number of fixing points: 3 pcs
EUR 288.10
Polini CP 23 mm carburetor (hand choke)
Manufacturer: Polini · Material: Aluminum · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Component group Carburetor: Carburetor complete · Mounting type: Plug connection clamped · Carburetor type: CP · Nominal diameter: 23 mm · Ø fuel hose connection: 6 mm · Ø fuel hose connection: 7 mm · Ø Inside entrance: 23 mm · Total length: 71.3 mm · Ø Output inside: 23 mm · Height: 136 mm · Ø Air filter connection: 46 mm · Width: 66 mm · Mixed oil connection: Yes · Vacuum connection: Yes · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Camouflaged: No · Nozzle size: 110 · Size of secondary nozzle: 40
EUR 172.80
Explore categories from Exhaust system
Moped fans also bought
VOCA silencer black with 3-point mount
Manufacturer: VOCA · Material: Aluminum · Material: Chrome steel (colloquially known as stainless steel) · Surface: anodized · Color: black · Ø inside: 20.3 mm · Total length: 220 mm · Total length: 235 mm · Ø Silencer: 60.8 mm · Ø bolt circle: 46 mm · Number of fixing points: 3 pcs
EUR 103.60
VOCA silencer red with 3-point mount
Manufacturer: VOCA · Material: Aluminum · Material: Chrome steel (colloquially known as stainless steel) · Surface: anodized · Color: black · Color: red · Thread type: M6x1 (standard thread) · Ø inside: 20.3 mm · Total length: 220 mm · Ø Silencer: 60.8 mm · Ø bolt circle: 46 mm · Number of fixing points: 3 pcs
EUR 103.60
Collection only possible with online purchase and appointment.
