Very useful tool for fixing the flywheel.
The flywheel stopper can be used on all Bosch and Ducati flywheels, as well as those with the same masses.
Stable construction made of galvanized steel. Comfortable rubber grip.
Ø outer plate: 93 mm
Ø inner plate: 51 mm
Pin spacing: 68 mm
Ø pins: 8 mm
Pin to heel length: 5.5 mm
Figure 3 shows the application of the tool.
Exceptional product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Material | Steel |
| Diameter | 19 mm |
| Total length | 290 mm |
| Height | 80 mm |
| Thickness | 5 mm |
| Surface | galvanized (blue), rubberized |
| Ø inside | 27 mm |
| Ø outside | 93 mm |
| Number of components | 1 pcs |
| Ø Pin | 8 mm |
| Area of application | Special tool |
| Universal | |
| Puch | |
| Sachs | 502 (Saxonette) - AL , AML 50/2 - L CH (0.8 PS) , ML CH (0.8 PS) , MB (2.6 PS) , MLB (2.6 PS) 50/3 50/4 - MLFB (2.6 PS) , LKH (4.5 PS) 50/5 503 - AAL , ABL , 2AL / 2BL , AB , AC , ADV 505 (with pedal shaft) - 1A (AT) , 2A (HG) 535 |
| Zündapp Belmondo | |
| Zündapp | 247 Motor |
Accessories & related products
HPI flywheel (Bosch / Ducati)
Manufacturer: HPI · Material: Steel · Thread type: MF27x1 LH (fine/left-hand thread) · Direction of rotation: left · Direction of rotation: right · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Ø Flywheel outside: 71.5 mm · Cone length: 28 mm · Cone ratio: 1:5 · Weight: 337 g
EUR 113.80
BOSCH flywheel clockwise NOS | Puch E50
Manufacturer: BOSCH · Material: Steel · Ø Internal flywheel: 91.2 mm · Direction of rotation: right · Weight: 900 g · Height: 36.6 mm · Ø cone small inside: 11.9 mm · Ø cone large inside: 15 mm · Ø Flywheel outside: 115.8 mm · Cone length: 17.8 mm · Cone ratio: 1:5 · Thread type: MF26x1.5 (fine pitch thread) · Thread length: 6.5 mm
EUR 255.00
Explore categories from Tools
Moped fans also bought
Hot 
GPO flywheel trigger M26x1.5 / M22x1.5 | Puch, Sachs, Tomos, Beta 521
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Clamping depth: 10 mm · Area of application: (Dis)assembly tool · Material: Steel · Total length: 55 mm · Total length: 75 mm · Surface: blackened · Strength class: 8.8 · Number of components: 1 pcs · Thread type: MF22x1.5 (fine pitch thread) · Thread type: MF26x1.5 (fine pitch thread)
EUR 11.80
swiing® ingenious puller L17 / BO15 / E15 shoulder bearing
Diameter: 24 mm · Diameter: 40.3 mm · Width across flats trigger: 8 mm · Width across flats trigger: 19 mm · Span: 24 mm · Manufacturer: swiing® ingenious parts · Clamping depth: 10 mm · Peel-off tray: BO15 · Peel-off tray: E15 · Peel-off tray: L17 · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Thread type: M8x1.25 (standard thread) · Number of components: 1 pcs · Total length: 120 mm · Area of application: (Dis)assembly tool
EUR 52.10
GPO clutch trigger M27x1.25, M20x1 | Sachs 503, 50/2, 50/3, 50/4
Width across flats trigger: 27 mm · Width across flats Screw: 19 mm · Manufacturer: GPO · Area of application: (Dis)assembly tool · Material: Steel · Total length: 57 mm · Surface: blackened · Strength class: 8.8 · Thread type: MF20x1 (fine pitch thread) · Thread type: MF27x1.25 (fine pitch thread)
EUR 23.60
EUR 20.80
swiing® revival clamping device clutch | Sachs 503, 50/2, 50/3, 50/4
Manufacturer: swiing® revival parts · Material: Aluminum · Material: Steel · Surface: anodized · Surface: galvanized (blue) · Thread type: M6x1 (standard thread) · Ø outside: 75 mm · Ø inside: 64 mm · Height: 16 mm · Thread length: 40 mm · Number of components: 4 pcs · Area of application: Special tool · Sachs OEM no.: 0276 057 000
EUR 35.50
GPO piston pin extractor Ø 10, 12, 14 mm
Diameter: 10 mm · Diameter: 12 mm · Diameter: 14 mm · Manufacturer: GPO · Material: Steel · Surface: burnished · Width across flats: 10 mm · Width across flats: 17 mm · Number of components: 7 pcs · Total length: 130 mm · Area of application: (Dis)assembly tool
EUR 23.60
Working late? Evening hours on Thursday until 20:00
