Intake air restrictor with Ø 11 mm inner diameter suitable for all 15 mm swiing and Bing original and reproduction Bing carburettors.
An O-ring is pre-assembled, which can be used for swiing and reproduction Bing carburetors. If an original Bing carburetor is available, the corresponding O-ring must also be ordered from the accessories and replaced with the pre-assembled one.
The fuel/air mixture is adjusted to suit the requirements.
For those who regulate the mixture via the intake air, however, these practical nozzles are like Christmas and Easter at the same time.
The tedious task of "taping off" the air filter is now a thing of the past.
The eyes of the thrifty among us will also light up, as fuel consumption is also minimized and more money is left over at the end of the month.
The throttle body is simply inserted into the carburettor on the intake side. Thanks to the attached sealing ring, the throttle body is bombproof.
Exceptional product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Material | Aluminum |
| Component group Carburetor | Adjusting screws, float, etc. |
| Surface | anodized |
| Color | black |
| Carburetor type | SRE |
| Ø Passage | 11 mm |
| Ø outside | 15 mm |
Ratings
Accessories & related products
GPO 15 mm carburetor tuning | Puch
Nominal diameter: 15 mm · Width: 50 mm · Manufacturer: GPO · Material: Aluminum · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Choke control: Hand choke · Total length: 66 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Height: 95 mm · Mounting type: Plug connection clamped · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle block: 2.17 · Camouflaged: No · Area of application: Tuning · Clamping screw torque (max.): 4 N/m
EUR 76.90
Hot 
swiing® ingenious 15 mm carburetor camouflaged | Puch
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Total length: 66 mm · Material: Aluminum · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Width: 50 mm · Height: 95 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.17 · Camouflaged: Yes · Clamping screw torque (max.): 4 N/m · Puch OEM number: 349.1.15.100.0 · Puch OEM number: 349.2.15.800.0 · Puch OEM number: 349.4.15.500.0 · Puch OEM number: 349.4.15.000.0 · Puch OEM number: 349.4.15.300.0 · Puch OEM number: 349.6.15.400.0 · Puch OEM number: 349.7.15.700.0 · Puch OEM number: 349.8.15.400.0 · Puch OEM number: 349.9.15.300.0
EUR 94.70
Hot
swiing® ingenious 15 mm carburetor camouflaged | Sachs 503
Nominal diameter: 15 mm · Manufacturer: swiing® ingenious parts · Total length: 66 mm · Material: Aluminum · Area of application: Tuning · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Width: 50 mm · Height: 95 mm · Nozzle thread: M3.5x0.6 (standard thread) · Ø fuel hose connection: 6 mm · Nozzle size: 62 · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 20 mm · Ø Internal connection: 20 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.17 · Camouflaged: Yes · Clamping screw torque (max.): 4 N/m
EUR 94.70
swiing® ingenious intake restrictor Ø 12 mm carburetor Bing SRE 15 mm
Manufacturer: swiing® ingenious parts · Ø outside: 15 mm · Total length: 17 mm · Material: Aluminum · Component group Carburetor: Adjusting screws, float, etc. · Surface: anodized · Color: black · Carburetor type: SRE · Ø Passage: 12 mm
EUR 9.25
Moped fans also bought
GPO mushroom air filter grille, Bing SRE (Ø=20 mm)
Manufacturer: GPO · Ø outside: 61 mm · Total length: 113 mm · Material: Metal · Material: Rubber · Area of application: Tuning · Color: Chrome · Color: black · Filter type: Grille · Length rubber part: 63.5 mm · Length of filter section: 49 mm · Mounting type: Bride · Mounting type: Plug connection clamped · Ø Internal connection: 20 mm · Camouflaged: No
EUR 15.30
Oil filler plug with sealing ring | Puch E50
Total length: 14.6 mm · Number of components: 2 pcs · Material: Steel · Surface: galvanized (blue) · Thread type: M10x1.5 (standard thread) · Drive: Slot · Screw head: Lens head · Ø External head: 14 mm · Thread length: 6 mm · Puch OEM number: 364.1.10.660.1
EUR 4.15
swiing® revival M8x12 oil drain plug & copper ring | Puch E50, Z50
Manufacturer: swiing® revival parts · Material: Copper · Material: Steel · Surface: galvanized (blue) · Color: silver · Total length: 18 mm · Thread type: M8x1.25 (standard thread) · Drive: External hexagon · Drive: Slot · Screw head: Hexagon · Width across flats Screw: 13 mm · Thread length: 12 mm · Puch OEM number: 901.1053
EUR 4.15
M10 sealing ring Fiber
Ø inside: 10 mm · Ø outside: 13.8 mm · Material: Fiber · Area of application: Standard · Surface: raw · Thickness: 1.6 mm · Place of use: Carburetor · Place of use: Motor housing · Pony OEM number: A1817 · Pony OEM number: A5650 · Puch OEM number: 27071 · Sachs OEM no.: 0250 042 001 · Sachs OEM no.: 0650 131 000
EUR 1.90
Collection only possible with online purchase and appointment.
