Intake air restrictor with Ø 12.5 mm inner diameter suitable for all 15 mm swiing and Bing original and reproduction Bing carburettors.
An O-ring is pre-assembled, which can be used for swiing and reproduction Bing carburetors. If an original Bing carburetor is available, the corresponding O-ring must also be ordered from the accessories section and replaced with the pre-assembled one.
The fuel/air mixture is adjusted to suit the requirements.
For those who regulate the mixture via the intake air, however, these practical nozzles are like Christmas and Easter at the same time.
The tedious task of "taping off" the air filter is now a thing of the past.
The eyes of the thrifty among us will also light up, as fuel consumption is also minimized and more money is left over at the end of the month.
The throttle body is simply inserted into the carburettor on the intake side. Thanks to the attached sealing ring, the throttle body is bombproof.
Exceptional product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Material | Aluminum |
| Component group Carburetor | Adjusting screws, float, etc. |
| Surface | anodized |
| Color | black |
| Carburetor type | SRE |
| Ø outside | 15 mm |
| Ø Passage | 12.5 mm |
Accessories & related products
GPO 15 mm carburetor tuning | Puch
Manufacturer: GPO · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Nozzle size: 62 · Mounting type: Plug connection clamped · Clamping screw torque (max.): 4 N/m · Total length: 66 mm · Width: 50 mm · Height: 95 mm · Area of application: Tuning
EUR 77.00
Hot 
swiing® ingenious 15 mm carburetor camouflaged | Puch
Manufacturer: swiing® ingenious parts · Total length: 66 mm · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Tuning · Carburetor type: SRE · Height: 95 mm · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Width: 50 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m · Alternative version of the Puch OEM number: 349.1.15.100.0 · Alternative version of the Puch OEM number: 349.2.15.800.0 · Alternative version of the Puch OEM number: 349.4.15.500.0 · Alternative version of the Puch OEM number: 349.4.15.000.0 · Alternative version of the Puch OEM number: 349.4.15.300.0 · Alternative version of the Puch OEM number: 349.6.15.400.0 · Alternative version of the Puch OEM number: 349.7.15.700.0 · Alternative version of the Puch OEM number: 349.8.15.400.0 · Alternative version of the Puch OEM number: 349.9.15.300.0
EUR 94.80
Hot
swiing® ingenious 15 mm carburetor camouflaged | Sachs 503
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Width: 50 mm · Carburetor type: SRE · Height: 95 mm · Nominal diameter: 15 mm · Total length: 66 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 62 · Area of application: Tuning · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Mounting type: Plug connection clamped · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle block: 2.17 · Clamping screw torque (max.): 4 N/m
EUR 94.80
swiing® ingenious intake restrictor Ø 12 mm carburetor Bing SRE 15 mm
Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Adjusting screws, float, etc. · Surface: anodized · Color: black · Carburetor type: SRE · Ø outside: 15 mm · Ø Passage: 12 mm · Total length: 17 mm
EUR 9.25
Moped fans also bought
swiing® revival seal Float SRE, SRC, SRF, SRA
Manufacturer: swiing® revival parts · Material: Sealing paper · Component group Carburetor: Sealing, revising · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Ø outside: 45 mm · Ø inside: 41 mm · Thickness: 1.5 mm · Sachs OEM no.: 0950 128 000 · Pony OEM number: A4519
EUR 3.35
BING O-ring Bing SRE & 85, Ø 20 mm
Manufacturer: BING · Material: Rubber · Surface: raw · Color: black · Place of use: Carburetor · Ø inside: 17.2 mm · Ø outside: 20 mm · Cord thickness: 1.4 mm · Number of components: 1 pcs · Area of application: Standard · Sachs OEM no.: 0250 160 101 · Pony OEM number: A4281
EUR 3.45
Hot
swiing® ingenious 15 mm carburetor camouflaged | Puch
Manufacturer: swiing® ingenious parts · Total length: 66 mm · Material: Aluminum · Component group Carburetor: Carburetor complete · Area of application: Tuning · Carburetor type: SRE · Height: 95 mm · Nominal diameter: 15 mm · Ø Internal connection: 20 mm · Width: 50 mm · Ø Inside entrance: 15 mm · Ø Output inside: 15 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 20 mm · Ø fuel hose connection: 6 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: Yes · Nozzle size: 62 · Clamping screw torque (max.): 4 N/m · Alternative version of the Puch OEM number: 349.1.15.100.0 · Alternative version of the Puch OEM number: 349.2.15.800.0 · Alternative version of the Puch OEM number: 349.4.15.500.0 · Alternative version of the Puch OEM number: 349.4.15.000.0 · Alternative version of the Puch OEM number: 349.4.15.300.0 · Alternative version of the Puch OEM number: 349.6.15.400.0 · Alternative version of the Puch OEM number: 349.7.15.700.0 · Alternative version of the Puch OEM number: 349.8.15.400.0 · Alternative version of the Puch OEM number: 349.9.15.300.0
EUR 94.80
Hot
swiing® ingenious 15 mm intake manifold camouflaged | Puch E50
Ø inside: 15 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Tuning · Ø External connection: 20 mm · Hole spacing inlet: 38 mm · Total length: 46 mm · Mounting type: Screws · Total height: 53 mm · Height flange center hole: 43 mm · Camouflaged: Yes · Number of fixing points: 2 pcs · Puch OEM number: 349.2.15.330.1 · Puch OEM number: 349.2.15.130.1
EUR 41.40
swiing® ingenious intake restrictor Ø 12 mm carburetor Bing SRE 15 mm
Manufacturer: swiing® ingenious parts · Material: Aluminum · Component group Carburetor: Adjusting screws, float, etc. · Surface: anodized · Color: black · Carburetor type: SRE · Ø outside: 15 mm · Ø Passage: 12 mm · Total length: 17 mm
EUR 9.25
Working late? Evening hours on Thursday until 20:00
