Rear mudguard made of stainless steel for various mopeds with 17-inch rims.
The highly polished surface ensures a first-class look and gives your moped the necessary shine.
Since the mudguard is folded at the rear, there is no sharp edge, which significantly reduces the risk of injury.
Tabs for cable routing are attached to the inside.
The mudguard deliberately has no holes for struts so that you can drill them individually.
Shape: round
Width of mudguard profile (A): 80 mm
Height of mudguard profile (B): 35 mm
End: closed folded / not folded
Material: chrome steel (colloquially known as stainless steel), highly polished
Total height from support surface to top edge (C): 325 mm
Total length over ends (D): 623 mm
Circumference (E): 1006 mm
Further parts for your wheel fairing, such as stainless steel polish or fastening material, can be found in the accessories section.
Nostalgic product for the highest demands from the quality brand swiing®.
| Manufacturer | swiing® revival parts |
| Material | Chrome steel (colloquially known as stainless steel) |
| Surface | polished |
| Color | Chrome |
| Wheel size | 17 " |
| Folding the ends | closed folded, not folded |
| Shape of the mudguard | partly round |
| Total length over ends | 623 mm |
| Scope | 1006 mm |
| Wide mudguard profile | 80 mm |
| Height of mudguard profile | 35 mm |
| Total height from support surface to top edge | 325 mm |
| Mounting type | Nuts & bolts |
Ratings
Accessories & related products
Inox
Hot 
GPO license plate holder Inox (CH version)
Ø mounting hole: 5 mm · Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Width: 105 mm · Mounting type: Nuts & bolts · Thread length: 8 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Thread type: M5x0.8 (standard thread) · Total length: 145 mm · Height: 5.3 mm · Number of fixing points: 2 pcs
EUR 12.60
Not in stock
swiing® revival 17" front fender "Retro" Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Shape of the mudguard: round · Total length over ends: 560 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm · Mounting type: Nuts & bolts · Wheel size: 17 "
EUR 69.10
Mudguard strut 17" chrome
Manufacturer: Made in Italy · Material: Steel · Color: Chrome · Surface: chrome-plated · Total length: 325 mm · Distance mudguard - center hole: 315 mm · Number of fixing points: 5 pcs · Wide intake: 65 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 10.8 mm · Hole spacing: 19 mm · Wheel size: 17 " · Mounting type: Nuts & bolts
EUR 14.90
Not in stock
Mudguard strut 16" chrome
Ø mounting hole: 5.5 mm · Ø mounting hole: 10.8 mm · Manufacturer: Made in Italy · Material: Steel · Surface: chrome-plated · Total length: 305 mm · Color: Chrome · Distance mudguard - center hole: 290 mm · Wide intake: 75 mm · Wheel size: 16 " · Mounting type: Nuts & bolts · Number of fixing points: 5 pcs
EUR 19.50
GPO license plate holder Inox black (CH version)
Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Surface: varnished · Color: black-matt · Width: 105 mm · Height: 6 mm · Total length: 147 mm · Number of fixing points: 6 pcs · Ø mounting hole: 5 mm · Thread type: M5x0.8 (standard thread) · Mounting type: Nuts & bolts
EUR 14.90
Explore categories from Mudguard
Moped fans also bought
Hot
KMC drive chain 415H (reinforced) 128L
Chain pitch: 1/2" x 3/16" · Chain type: 415H · Manufacturer: KMC · Material: Steel · Surface: blank / oiled · Color: gray · Rolling circumference: 1626 mm · Number of chain links: 128 pcs · Chain lock type: Spring lock · Ø bore: 4 mm · Ø Pin: 3.94 mm
EUR 14.40
Inox
Hot
GPO license plate holder Inox (CH version)
Ø mounting hole: 5 mm · Manufacturer: GPO · Material: Chrome steel (colloquially known as stainless steel) · Color: silver · Width: 105 mm · Mounting type: Nuts & bolts · Thread length: 8 mm · Hole spacing: 30 mm · Hole spacing: 50 mm · Thread type: M5x0.8 (standard thread) · Total length: 145 mm · Height: 5.3 mm · Number of fixing points: 2 pcs
EUR 12.60
Not in stock
Magura gas cable clamp / deco cable clamp Ø 5 x 6 mm
Drive: Slot · Screw head: Lens head · Manufacturer: Magura · Ø Cable bushing: 1.6 mm · Material: Brass · Material: Steel · Surface: nickel-plated · Number of components: 2 pcs · Ø outside: 5 mm · Total length: 6 mm · Thread type: M4x0.7 (standard thread) · Thread length: 4 mm
EUR 2.30
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents: 450 ml · Area of application: Gearbox lubrication with clutch · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C
EUR 11.40
EUR 25.33/l
Manual indoor cable set
Ø Stranded wire: 1.2 mm · Ø Stranded wire: 1.25 mm · Ø Stranded wire: 1.5 mm · Ø Stranded wire: 1.8 mm · Nipple shape: Barrel (transverse) · Nipple shape: Cylinder · Nipple shape: Pears · Manufacturer: Made in Germany · Material: Steel · Quantity: 4 pcs · Total length: 2200 mm
EUR 11.40
swiing® revival air filter Racing | Sachs 503
Manufacturer: swiing® revival parts · Camouflaged: No · Material: Plastic · Color: black · Filter type: Racing screen · Width: 68 mm · Height: 52 mm · Ø Internal connection: 20 mm · Total length: 165 mm · Area of application: Tuning · Mounting type: Plug connection clamped
EUR 69.10
swiing® revival 17" front fender "Retro" Inox
Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Surface: polished · Color: Chrome · Folding the ends: closed folded · Shape of the mudguard: round · Total length over ends: 560 mm · Scope: 700 mm · Wide mudguard profile: 80 mm · Height of mudguard profile: 35 mm · Total height from support surface to top edge: 180 mm · Mounting type: Nuts & bolts · Wheel size: 17 "
EUR 69.10
Collection only possible with online purchase and appointment.
