High-quality flange gasket consisting of 2 oil paper gaskets and a spacer made of temperature-resistant plastic for camouflaging the 17 mm intake manifold of your Puch Maxi S/N with E50 as well as Puch X30 moped / moped with Z50 engine.
The 4 mm special gasket with square inlet prevents excessive heating of the intake tract, which could have a negative effect on the air-fuel mixture. Excessively high temperatures in the intake tract can reduce the air density and thus reduce the efficiency of the combustion process.
The intake gasket can also be used if the carburettor needs to be raised.
You can find more intake gaskets, intake manifolds and carburetors in the accessories section.
Excellent product for the highest demands of the quality brand swiing®.
| Manufacturer | swiing® ingenious parts |
| Material | Oiled paper, Phenolic resin (known as Bakelite®) |
| Nominal diameter | 17 mm |
| Ø screw holder | 6.2 mm |
| Thickness | 4 mm |
| Ø inside | 17 mm |
| Hole spacing inlet | 38 mm |
| Puch | E50 Z50 (X30 Sport) |
Accessories & related products
Hot 
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Height: 89 mm · Height: 109 mm · Nominal diameter: 17 mm · Total length: 65 mm · Width: 47 mm · Ø Inside entrance: 17 mm · Ø Output inside: 17.1 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 27.5 mm · Ø Internal connection: 23 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Area of application: Tuning · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.2 · Nozzle size: 74 · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 142.00
Hot
swiing® ingenious intake manifold 17 mm SRF camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Ø External connection: 23 mm · Total length: 38 mm · Mounting type: Stud bolts & nuts · Total height: 53.5 mm · Ø inside: 17 mm · Height flange center hole: 42 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of fixing points: 2 pcs · Hole spacing inlet: 38 mm
EUR 53.20
swiing® ingenious intake manifold 17 mm SRF | Puch Z50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Ø External connection: 23 mm · Total length: 45 mm · Mounting type: Stud bolts & nuts · Total height: 73 mm · Ø inside: 17 mm · Height flange center hole: 61 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of fixing points: 2 pcs · Hole spacing inlet: 38 mm
EUR 59.10
swiing® ingenious 4 mm intake gasket 15 mm intake manifold square | Puch E50, Z50, ZA50
Place of use: Admission · Manufacturer: swiing® ingenious parts · Material: Oiled paper · Material: Phenolic resin (known as Bakelite®) · Nominal diameter: 15 mm · Ø screw holder: 6.2 mm · Thickness: 4 mm · Ø inside: 15 mm · Hole spacing inlet: 38 mm
EUR 8.90
Moped fans like you also bought:
Gas cable Ø 1.25 mm x 220 cm (cylindrical nipple) Bing
Ø Stranded wire: 1.25 mm · Cable length: 2200 mm · Nipple shape: Cylinder · Ø nipple: 3 mm · Nipple length: 5 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Number of components: 1 pcs · Area of application: Standard
EUR 3.30
Hot
swiing® ingenious 17 mm SRF carburetor tuning camouflaged | Puch Maxi, Supermaxi, X30 NS / NL
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Component group Carburetor: Carburetor complete · Carburetor type: SRE · Height: 89 mm · Height: 109 mm · Nominal diameter: 17 mm · Total length: 65 mm · Width: 47 mm · Ø Inside entrance: 17 mm · Ø Output inside: 17.1 mm · Mounting type: Plug connection clamped · Ø Air filter connection: 27.5 mm · Ø Internal connection: 23 mm · Ø fuel hose connection: 5 mm · Mixed oil connection: No · Vacuum connection: No · Choke control: Hand choke · Area of application: Tuning · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.2 · Nozzle size: 74 · Clamping screw torque (max.): 3 N/m · Clamping screw torque (max.): 4 N/m
EUR 142.00
Hot
swiing® ingenious intake manifold 17 mm SRF camouflaged | Puch E50
Manufacturer: swiing® ingenious parts · Material: Aluminum · Camouflaged: Yes · Ø External connection: 23 mm · Total length: 38 mm · Mounting type: Stud bolts & nuts · Total height: 53.5 mm · Ø inside: 17 mm · Height flange center hole: 42 mm · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Number of fixing points: 2 pcs · Hole spacing inlet: 38 mm
EUR 53.20
Collection only possible with online purchase and appointment.
