Clutch drum of the primary drive for 2-speed manual Puch mopeds / mopeds with Z50 engines.
Notes: Körbe with 18 teeth are usually only installed on German engines. The basket also does not have lubrication holes. These should be drilled subsequently.
You can find the sliding bushes, thrust washers and other parts in the accessories section.
Original Puch spare part number: 350.1.12.002.2
Details
| Material | Steel |
| Toothing type | helical toothed |
| Number of teeth | 18 pcs |
| Area of application | Standard |
Suitable for the following models
| Puch | Z50 (X30 Sport) Z50 (X30 Velux) 2-speed MS, MV, MV50 3-speed VSD, DS, VZ, MC |
Accessories & related products
Surflex clutch plate set | Puch Z50
Manufacturer: Surflex · Material: Composite materials · Material: Steel · Recording type: Interlocking · Ø inside: 46.3 mm · Ø inside: 51.3 mm · Ø outside: 69.6 mm · Ø outside: 74.8 mm · Number of slats: 2 pcs · Thickness: 2.75 mm · Area of application: Original
EUR 40.60
Serrated lock washer M10 galvanized
Material: Steel · Surface: galvanized (blue) · Ø inside: 4.5 mm · Ø inside: 5.5 mm · Ø inside: 6.35 mm · Ø inside: 7.4 mm · Ø inside: 10.8 mm · Ø inside: 12.8 mm · Thread size: M10 · Thread size: M12 · Thread size: M4 · Thread size: M5 · Thread size: M6 · Thread size: M7 · Thread size: M8
EUR 0.35
HS-Retro clutch basket 19 teeth 2-plate version | Puch Z50
Height: 26.6 mm · Manufacturer: HS-Retro · Ø outside: 74.8 mm · Material: Steel · Toothing type: helical toothed · Number of teeth: 19 pcs · Ø inside: 17 mm · Area of application: High End · Area of application: Original · Puch OEM number: 350.1.12.002.2
EUR 186.20
Moped fans like you also bought:
swiing® revival gasket set Z50 engine | Puch X30 NS / NL
Manufacturer: swiing® revival parts · Material: Sealing paper · Number of components: 10 pcs · Ø outlet inside: 22 mm · Hole spacing outlet: 42 mm · Hole spacing inlet: 32 - 38 mm · Hole pattern [mm]: 44 x 44 · Area of application: Standard
EUR 23.20
Motorex engine oil (gear oil) manual 450 ml
Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Temperature resistance (min.): -30 - 220 °C · Area of application: Gearbox lubrication with clutch
EUR 11.50
EUR 25.56/l
swiing® ingenious clutch spring reinforced +20% (Version 2.0) | Puch Z50
Spring design: Pressure spring · Ø wire: 4.6 mm · Ø inside: 30 mm · Ø outside: 39 mm · Total length: 20.5 mm · Color: blue · Manufacturer: swiing® ingenious parts · Number of components: 1 pcs · Material: Spring steel · Surface: coated · Area of application: Tuning
EUR 27.70
Collection only possible with online purchase and appointment.
