Reinforced, CNC-milled clutch bell for racing purposes. Designed for the highest loads.
Can only be used in conjunction with the KTM SX50 clutch. Well proven in racing.
Fits E50 engines of all Puch Maxi mopeds.
Turned version: can only be used in conjunction with a cable or kick starter!
Reinforced press fit. No more welding points necessary.
21 teeth, helically toothed.
The special sliding bushes are included in the scope of delivery.
Manufacturer | MBR |
Toothing type | helical toothed |
Number of teeth | 21 pcs |
Area of application | Tuning |
Puch | E50 |
Accessories & related products
MBR Clutch KTM SX50 | Puch E50
Material: Steel · Manufacturer: MBR · Material addition: Aluminum · Recording type: Cone mounting · Number of jaws: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning · Number of springs: 3 pcs
EUR 401.80
Moped fans also bought
BING 15 mm Bing original carburetor (1/15/46A)
Nominal diameter: 15 mm · Manufacturer: BING · Material: Aluminum · Component group Carburetor: Carburetor complete · Mounting type: Plug connection clamped · Carburetor type: SRE · Choke control: Hand choke · Ø fuel hose connection: 5.3 mm · Ø fuel hose connection: 6 mm · Total length: 66 mm · Ø Inside entrance: 15 mm · Ø Internal connection: 20 mm · Ø Output inside: 15 mm · Ø Air filter connection: 20 mm · Width: 50 mm · Height: 95 mm · Mixed oil connection: No · Vacuum connection: No · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle block: 2.17 · Camouflaged: No · Nozzle size: 82 · Area of application: Standard · Area of application: Tuning · Clamping screw torque (max.): 4 N/m
EUR 157.10
Polini 24 mm carburetor (hand choke)
Nominal diameter: 24 mm · Manufacturer: Polini · Mounting type: Plug connection · Component group Carburetor: Carburetor complete · Carburetor type: Flat slide valve · Choke control: Hand choke · Nozzle thread: M5x0.8 (standard thread) · Area of application: Tuning · Ø fuel hose connection: 6 mm · Ø Air filter connection: 49 mm · Mixed oil connection: Yes · Vacuum connection: Yes
EUR 177.20
Gilardoni italkit 47 mm cylinder kit without cylinder head | Puch
Nominal diameter: 47 mm · Manufacturer: Gilardoni italkit · Material: Aluminum · Surface: sandblasted · Area of application: Tuning · Crankshaft stroke: 43 mm · Displacement: 75 ccm · Ø cylinder neck: 51 mm · Ø outlet inside: 26.5 mm · Ø Inlet inside: 18.3 mm · Number of fixing points: 4 pcs · Ø piston pin (B): 12 mm · Inlet window: 38.5 x 25.8 · Thread inlet: M6x1 (standard thread) · Hole spacing inlet: 35.5 mm · Hole spacing inlet: 60 mm · Decompressor: No · Hole spacing outlet: 42 mm · Outlet type: slanted · Thread outlet: M6x1 (standard thread) · Hole pattern [mm]: 44 x 44 · Camouflaged: No
EUR 248.10
MBR Clutch KTM SX50 | Puch E50
Material: Steel · Manufacturer: MBR · Material addition: Aluminum · Recording type: Cone mounting · Number of jaws: 3 pcs · Area of application: High End · Area of application: MX · Area of application: Racing · Area of application: Tuning · Number of springs: 3 pcs
EUR 401.80
MBR piston 46.94 mm Gilardoni italkit | Puch
Manufacturer: MBR · Manufacturer: Wössner · Surface: molybdenum-coated · Ø outside piston (A): 46.94 mm · Compression height (C): 22 mm · Curvature (D): 2.65 mm · Total piston height (E): 48.15 mm · Number of piston rings (F): 1 pcs · Nominal diameter: 47 mm · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Ø piston pin (B): 12 mm · Piston ring height: 1 mm · Piston weight: 93 g
EUR 140.50