Additional weight made of stainless steel suitable for HPI Zündungen from Sachs 503, Puch X30 Velux, as well as Zündapp Belmondo mopeds / mopeds with blower.
The weight is mounted underneath the blower wheel. The weight is mainly used to increase the flywheel mass.
The additional weight makes the engine run more smoothly when stationary and makes starting easier without stalling the engine, which is often the case with a lightened flywheel.
You can find the corresponding flywheel and other attachments in the accessories section.
Exclusive product for the highest demands of the quality brand swiing®.
Details
| Manufacturer | swiing® ingenious parts |
| Area of application | Performance, Racing, High End, Tuning |
| Material | Chrome steel (known as Nirosta®) |
| Surface | blank |
| Ø outside | 117 mm |
| Ø inside | 71.8 mm |
| Ø bolt circle | 101 mm |
| Number of fixing points | 4 pcs |
| Thickness | 5 mm |
| Ø mounting hole | 5 mm |
| Weight | 250 g |
Suitable for the following models
| Universal | |
| Puch | ZA50 (fan-cooled) Z50 (X30 Velux) |
| Sachs | 503 - AAL, ABL, 2AL / 2BL, AB, AC, ADV |
| Pony / Cilo (Beta 521 & 512) | Beta 512 Beta various Beta 521 (engine) |
| Zündapp Belmondo |
Accessories & related products
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Material: Aluminum · Material: Steel · Ø Internal flywheel: 61.5 mm · Light coil voltage: 12 V · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Tension: 12 V · Ø Flywheel outside: 71.5 mm · Ø cable: 7 mm · Performance: 60 W · Weight: 340 g · Number of fixing points: 6 pcs · Mounting type: Screws · Area of application: Tuning
EUR 355.00
HPI racing ignition clockwise without light
Manufacturer: HPI · Material: Aluminum · Material: Steel · Area of application: Tuning · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Number of fixing points: 3 pcs · Ø Flywheel outside: 62 mm · Ø cable: 7 mm · Weight: 424 g · Mounting type: Screws
EUR 331.40
HPI flywheel (Bosch/Ducati)
Manufacturer: HPI · Material: Steel · Thread type: MF27x1 LH (fine/left-hand thread) · Direction of rotation: left · Direction of rotation: right · Ø cone small inside: 10.9 mm · Ø cone large inside: 15.8 mm · Ø Flywheel outside: 71.5 mm · Cone length: 28 mm · Cone ratio: 1:5
EUR 113.50
HPI stator ignition
Cable length: 640 mm · Manufacturer: HPI · Number of cables: 4 pcs · Tension: 12 V · Material: Aluminum · Surface: anodized · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Color: black · Performance: 60 W · Ø outside: 90 mm · Ø inside: 27.5 mm · Number of fixing points: 6 pcs · Ø bolt circle: 80 mm
EUR 177.50
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Height: 13.5 mm · Ø outside: 120 mm · Ø inside: 39 mm · Number of fixing points: 10 pcs · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Weight: 87 g
EUR 70.90
swiing® ingenious 100 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Chrome steel (known as Nirosta®) · Surface: blank · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø outside: 117 mm · Ø inside: 71.8 mm · Number of fixing points: 4 pcs · Ø bolt circle: 101 mm · Thickness: 1.8 mm · Ø mounting hole: 5 mm · Weight: 100 g
EUR 23.60
Hot 
HPI ignition box programmable (two ignition curves)
Manufacturer: HPI · Material: Plastic · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Color: red · Width: 100 mm · Height: 28 mm · Total length: 63 mm · Number of fixing points: 2 pcs · Ø mounting hole: 7.5 mm · Hole spacing: 80 mm
EUR 361.00
Moped fans like you also bought:
Motorex engine oil (gear oil) manual 450 ml
Temperature resistance (min.): -30 - 220 °C · Manufacturer: Motorex · Viscosity (SAE): 80W · Oil type: GL4 · Contents [ml]: 450 ml · Gearbox type: Foot control · Gearbox type: Manual gearshift · Area of application: Gearbox lubrication with clutch
EUR 11.70
EUR 26.00/l
HPI racing ignition 12V with light 60W
Manufacturer: HPI · Material: Aluminum · Material: Steel · Ø Internal flywheel: 61.5 mm · Light coil voltage: 12 V · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Tension: 12 V · Ø Flywheel outside: 71.5 mm · Ø cable: 7 mm · Performance: 60 W · Weight: 340 g · Number of fixing points: 6 pcs · Mounting type: Screws · Area of application: Tuning
EUR 355.00
swiing® ingenious fan wheel black (EVO, HPI, Bosch,Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: black · Height: 13.5 mm · Ø outside: 120 mm · Ø inside: 39 mm · Number of fixing points: 10 pcs · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Ø mounting hole: 5.5 mm · Ø mounting hole: 6 mm · Weight: 87 g
EUR 70.90
swiing® ingenious 100 g additional weight HPI Inox | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Chrome steel (known as Nirosta®) · Surface: blank · Area of application: High End · Area of application: Performance · Area of application: Racing · Area of application: Tuning · Ø outside: 117 mm · Ø inside: 71.8 mm · Number of fixing points: 4 pcs · Ø bolt circle: 101 mm · Thickness: 1.8 mm · Ø mounting hole: 5 mm · Weight: 100 g
EUR 23.60
HPI racing ignition set 12V with light 60W | Puch X30 Velux / Sachs 503 / Zündapp Belmondo
Manufacturer: HPI · Manufacturer: swiing · Area of application: Tuning · Tension: 12 V · Performance: 60 W · Direction of rotation: left · Direction of rotation: right · Ø mounting plate: 90 mm · Ø cable: 7 mm
EUR 443.80
swiing® ingenious fan wheel red (EVO, HPI, Bosch, Ducati) | Puch X30 Velux / Sachs 503 / Belmondo
Manufacturer: swiing® ingenious parts · Material: Aluminum · Surface: anodized · Color: red · Height: 13.5 mm · Ø outside: 120 mm · Ø inside: 39 mm · Number of fixing points: 10 pcs · Ø bolt circle: 48 mm · Ø bolt circle: 70 mm · Ø bolt circle: 100 mm · Ø mounting hole: 6 mm · Weight: 87 g
EUR 74.00
Collection only possible with online purchase and appointment.
