profile
All wishlists Community wishlists
Hot Hot
Carousel Image 1
Carousel Image 2
Carousel Image 3
Carousel Image 4
Carousel Image 5
Carousel Image 6
logo_gpo

For: Sachs

35658

GPO 41 mm cylinder kit "Divertimento" (slotted) | Sachs 502, 50/2, 50/3, 50/4

EUR 201.60

Incl. 21% VAT.

Optionally suitable

Description
Fan-cooled 41 mm (55 ccm) racing kit suitable for your moped with a Sachs 50, 502, 50/2, 50/3, or 50/4 engine. The valve timing on this racing cylinder is intentionally set low, which ensures strong torque in the lower RPM range. The two-piece exhaust further enhances this effect. So you can enjoy every ride discreetly in everyday life, a “30 km” embossing conceals the actual power of your engine. The racing cylinder kit includes the cylinder, a complete piston kit, cylinder studs, and a cylinder base gasket.

Differences from the original BADASS Diablo cylinder: 
  • On the GPO cylinder, the web of the split exhaust port is slightly ground down to minimize the risk of an exhaust-side heat seizure.
  • On the GPO tuning cylinder, the edges of the overflow channels near the cylinder neck have been chamfered to facilitate piston ring installation.
  • The original BADASS cylinder is shipped with a GOL piston, while the GPO Divertimento is equipped with a GPO piston matched to the cylinder. Differences are evident, among other things, in the crown profile and in the cutouts on the piston skirt for the overflow channels.
  • On the GPO Divertimento, more space has been created for the nuts used to secure the cylinder base.
  • The required M6x62 mm stud bolts for mounting the cylinder base, as well as nuts, washers, and stud bolts for the intake, are included as standard with the GPO.
  • The intake tract has been repositioned so that the carburetor and air filter are now aligned horizontally and no longer point diagonally upward.
  • On the BADASS Diablo, the embossed “30 km” logo is positioned off-center, whereas on the GPO Divertimento it is centered, as on the original Swiss cylinder.
Notes:
The cylinder base is factory-designed for Swiss 50/2 (502) engines. However, the mounting holes for the German 50/2 engine casing are marked. This allows you to drill them out if necessary and use the cylinder as usual for your moped with a German engine casing.
The large intake allows for the use of the 17 mm swiing® tuning carburetor, provided it is mounted with a short air filter cap, a matching clamp (short), and the appropriate cover plate (long/deep). Please note the installation direction during assembly. The piston is installed with the arrow pointing toward the exhaust on the exhaust side. You can find the larger 43 mm version of the racing kit, the matching 17 mm carburetor, and the air filter parts described above in the accessories section. A good, affordable standard replacement part. GPO – GOOD PARTS ONLY.
GPO 41 mm "Divertimento" cylinder (slotted) | Sachs 502, 50/2, 50/3, 50/4

For: Sachs

GPO 41 mm "Divertimento" cylinder (slotted) | Sachs 502, 50/2, 50/3, 50/4

34347

Manufacturer: GPO · Material: Gray cast iron · Displacement: 55 ccm · Nominal diameter: 41 mm · Ø cylinder neck: 46 mm · Ø Outlet outside: 40 mm · Hole spacing: 28 mm · Hole spacing inlet: 31 mm · Outlet type: Union nut · Camouflaged: Yes · Number of fixing points: 4 pcs

GPO 41 mm piston "Divertimento" | Sachs 502, 50/2, 50/3, 50/4

For: Sachs

GPO 41 mm piston "Divertimento" | Sachs 502, 50/2, 50/3, 50/4

35495

Manufacturer: GPO · Nominal diameter: 41 mm · Material: Aluminum · Ø outside piston (A): 40.95 mm · Ø piston pin (B): 12 mm · Compression height (C): 28 mm · Curvature (D): 3.4 mm · Total piston height (E): 50.5 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Thick piston ring: 1.7 mm

GPO gasket set "Divertimento" & "Diablo" cylinder | Sachs 502, 50/2 (CH)

For: Sachs

GPO gasket set "Divertimento" & "Diablo" cylinder | Sachs 502, 50/2 (CH)

35659

Manufacturer: GPO · Material: Sealing carton · Number of components: 4 pcs

GPO stud bolt set "Divertimento" & "Diablo" cylinder | Sachs 502, 50/2, 50/3, 50/4

For: Sachs

GPO stud bolt set "Divertimento" & "Diablo" cylinder | Sachs 502, 50/2, 50/3, 50/4

35661

Manufacturer: GPO · Material: Steel · Surface: blackened · Diameter: 5.3 mm · Thread type: M6x1 (standard thread) · Total length: 62 mm · Thread length: 11.8 mm, 7.8 mm · Width across flats: 10 mm · Strength class: 10.9 · Drive: External hexagon · Nominal diameter (thread): 6 mm

swiing® revival stud bolt set M5x26 inlet (10.9 strength) | Sachs 50/2, 502, 50/3

For: Sachs

swiing® revival stud bolt set M5x26 inlet (10.9 strength) | Sachs 50/2, 502, 50/3

28089

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Thread type: M5x0.8 (standard thread) · Total length: 26 mm · Thread length: 14 mm, 7 mm · Width across flats: 8 mm · Strength class: 8, 10.9 · Drive: External hexagon · Nominal diameter (thread): 5 mm

Sachs

50 (Fahrtwind, 1.25 / 1.5 hp, DE)

502 (Saxonette) - AL , AML

50/2 - L CH (0.8 PS) , ML CH (0.8 PS) , MB (2.6 PS) , MLB (2.6 PS)

50/3

50/4 - MLFB (2.6 PS) , LKH (4.5 PS)

Accessories & related products

Motorex 2-stroke oil semi-synthetic 1 L (for running in cylinders)
undefined

Universal

15357

Motorex 2-stroke oil semi-synthetic 1 L (for running in cylinders)

Manufacturer: Motorex · Oil type: semi-synthetic · Contents: 1000 ml · Color: green

EUR 23.60

EUR 23.60/l

Inox
swiing® revival screw set cylinder head Inox | Sachs 503 / 50/2 / 50/3 / 50/4
undefined

For: Sachs

18009

swiing® revival screw set cylinder head Inox | Sachs 503 / 50/2 / 50/3 / 50/4

Manufacturer: swiing® revival parts · Material: Chrome steel (colloquially known as stainless steel) · Area of application: Standard · Number of components: 12 pcs · Drive: External hexagon · Screw head: Hexagon · Ø shaft: 5.85 mm · Thread type: M6x1 (standard thread) · Shank: Yes · Nominal diameter (thread): 6 mm · Total length: 34 mm · Shank length: 8 mm · Width across flats: 10 mm · Thread length: 22 mm

EUR 8.80

GPO Exhaust System "Cigar" (Ø 32 / 70 mm) Chrome | Sachs 50/2
undefined

For: Sachs

23276

GPO Exhaust System "Cigar" (Ø 32 / 70 mm) Chrome | Sachs 50/2

EUR 124.50

Not in stock

- 10 %
swiing® revival carburetor 17 mm Bing SSB 1/17/69
undefined

For: Sachs

27370

swiing® revival carburetor 17 mm Bing SSB 1/17/69

Nominal diameter: 17 mm · Manufacturer: swiing® revival parts · Material: Aluminum · Camouflaged: No · Component group Carburetor: Carburetor complete · Area of application: Standard · Area of application: Tuning · Carburetor type: SSB · Width: 85 mm · Choke control: without choke · Height: 100 mm · Total length: 132 mm · Ø fuel hose connection: 6 mm · Mounting type: Flange · Hole spacing inlet: 31 mm · Nozzle size: 76 · Mixed oil connection: No · Vacuum connection: No

EUR 150.60

EUR 135.10

swiing® ingenious gasket cylinder head 41 mm | Sachs 503, 502, 50/2, 50/3, 50/4
undefined

For: Sachs

27906

swiing® ingenious gasket cylinder head 41 mm | Sachs 503, 502, 50/2, 50/3, 50/4

Nominal diameter: 41 mm · Manufacturer: swiing® ingenious parts · Material: Aluminum · Area of application: Standard · Ø cylinder: 41 mm · Place of use: Cylinder head · Ø inside: 41.7 mm · Thickness: 0.3 mm · Hole pattern [mm]: 37 x 37

EUR 5.80

swiing® ingenious exhaust nut M40x1.5 long 32 mm manifold | Sachs
undefined

For: Sachs

28686

swiing® ingenious exhaust nut M40x1.5 long 32 mm manifold | Sachs

Manufacturer: swiing® ingenious parts · Material: Steel · Surface: chrome-plated · Ø inside: 32.5 mm · Nut type: Union nut · Ø outside: 45 mm · Height: 22 mm · Nominal diameter (thread): 40 mm · Thread type: MF40x1.5 (fine pitch thread)

EUR 25.70

swiing® ingenious hook wrench M40 exhaust nut | Sachs 50/2
undefined

For: Sachs

29104

swiing® ingenious hook wrench M40 exhaust nut | Sachs 50/2

Manufacturer: swiing® ingenious parts · Material: Rubber · Material: Steel · Surface: galvanized (blue) · Area of application: Workshop accessories · Ø inside: 33 mm · Total length: 280 mm · Ø outside: 46 mm · Width: 67 mm · Height: 5 mm · Number of components: 1 pcs · Weight: 300 g

EUR 29.50

NC-Motorparts 41 mm Cylinder Head Tuning | Sachs 50/3, 50/4 LKH
undefined

For: Sachs

29270

NC-Motorparts 41 mm Cylinder Head Tuning | Sachs 50/3, 50/4 LKH

Manufacturer: NCMotorparts · Ø outside: 128 mm · Material: Aluminum · Surface: sandblasted · Ø cylinder: 41 mm · Candle thread: long · Hole pattern [mm]: 37 x 37 · Number of fixing points: 4 pcs · Decompressor: No · Camouflaged: Yes · Area of application: Tuning

EUR 115.00

BAD ASS cylinder head L Ø 41-43 mm | Sachs 502, 50/2, 50/3, 50/4
undefined

For: Sachs

31318

BAD ASS cylinder head L Ø 41-43 mm | Sachs 502, 50/2, 50/3, 50/4

Manufacturer: BAD ASS · Material: Aluminum · Area of application: Tuning · Ø cylinder: 41 - 43 mm · Ø outside: 108 mm · Ø screw holder: 19.3 mm · Hole pattern [mm]: 37 x 37 · Number of fixing points: 1 pcs · Number of fixing points: 4 pcs · Decompressor: M10x1.5

EUR 177.90

GPO cylinder base gasket "Divertimento" & "Diablo" | Sachs 50, 50/3, 50/4 (DE)
undefined

For: Sachs

32393

GPO cylinder base gasket "Divertimento" & "Diablo" | Sachs 50, 50/3, 50/4 (DE)

Place of use: Cylinder base · Manufacturer: GPO · Material: Oiled paper · Thickness: 0.45 mm · Ø cylinder: 41 mm · Hole pattern [mm]: 51 x 40 · Area of application: Tuning

EUR 11.80

swiing® ingenious Cylinder Head Gasket 41 mm Copper | Sachs 503
undefined

For: Sachs

38632

swiing® ingenious Cylinder Head Gasket 41 mm Copper | Sachs 503

Manufacturer: swiing® ingenious parts · Material: Copper · Ø cylinder: 41 mm · Ø inside: 41.5 mm · Nominal diameter: 41 mm · Thickness: 0.5 mm · Place of use: Cylinder head · Hole pattern [mm]: 37 x 37

EUR 7.00

Explore categories from Cylinder

S-10-60-030_Zylinder_Rennsatz
Cylinder & racing set
S-10-60-040_Zylinderkopf
Cylinder head
S-10-60-020_Kolben
Piston
S-10-60-010_Dichtungen
Seals
S-10-60-050_Zubehoer_Dekompressor
Decompressor & tools & accessories

Moped fans also bought

Chain tensioner Puch X30 & Maxi

For: Puch

10120

Chain tensioner Puch X30 & Maxi

Material: Plastic · Material: Steel · Surface: galvanized (blue) · Color: black · Color: silver · Number of teeth: 10 pcs · Total length: 170 mm · Ø outside sprocket: 36 mm · Number of fixing points: 1 pcs · Puch OEM number: 349.1.28.520.0

EUR 11.80

GPO gasket cylinder base 0.35 mm original | Puch
undefined

For: Puch

10193

GPO gasket cylinder base 0.35 mm original | Puch

Manufacturer: GPO · Ø inside: 47 mm · Material: Oiled paper · Nominal diameter: 47 mm · Place of use: Cylinder base · Thickness: 0.3 mm · Hole pattern [mm]: 44 x 44 · Area of application: Standard · Puch OEM number: 349.3.10.013.1

EUR 2.60

Hot Hot
swiing® revival nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF
undefined

For: Puch · Sachs

10203

swiing® revival nozzle set M3.5 (64 - 74) Bing SRE, SRA, SRC, SRF

Manufacturer: swiing® revival parts · Material: Brass · Component group Carburetor: Spraying · Quantity: 6 pcs · Carburetor type: SRA (1/11/31) Velux · Carburetor type: SRA (1/11/35) Velux · Carburetor type: SRC · Carburetor type: SRE · Carburetor type: SRF · Nozzle type: Main nozzle · Drive: Slot · Total length: 6 mm · Nozzle thread: M3.5x0.6 (standard thread) · Nozzle size: 64 · Nozzle size: 66 · Nozzle size: 68 · Nozzle size: 70 · Nozzle size: 72 · Nozzle size: 74

EUR 18.90

Mikalor Solid Screw Clamp 25–27 mm W2 Stainless Steel / Galvanized
undefined

Universal

24326

Mikalor Solid Screw Clamp 25–27 mm W2 Stainless Steel / Galvanized

Width: 18 mm · Ø inside: 25 - 27 mm · Manufacturer: Mikalor · Material: Steel · Surface: galvanized (blue)

EUR 10.60

Hot Hot
VEC electronic ignition coil (replaces ignition coil, capacitor & contact breaker)
undefined

For: Universal · Puch · Sachs · Zündapp Belmondo

25031

VEC electronic ignition coil (replaces ignition coil, capacitor & contact breaker)

Place of use: Internal (in the ignition) · Manufacturer: VEC · Ø cable holder: 5 mm · Height: 48 mm · Total length: 77 mm · Color: black · Ø Internal flywheel: 90 mm · Area of application: Original · Area of application: Performance · Area of application: Standard · Ø mounting hole: 4.6 mm · Hole spacing: 54 mm · Cable length: 140 mm · Cable length: 420 mm · Mounting type: Screws · Number of fixing points: 2 pcs

EUR 177.90

Not in stock

swiing® revival stud bolt set M5x26 inlet (10.9 strength) | Sachs 50/2, 502, 50/3
undefined

For: Sachs

28089

swiing® revival stud bolt set M5x26 inlet (10.9 strength) | Sachs 50/2, 502, 50/3

Manufacturer: swiing® revival parts · Material: Steel · Surface: galvanized (blue) · Drive: External hexagon · Total length: 26 mm · Thread type: M5x0.8 (standard thread) · Nominal diameter (thread): 5 mm · Width across flats: 8 mm · Thread length: 7 mm · Strength class: 8 · Strength class: 10.9 · Thread length: 14 mm

EUR 6.75

GPO 41 mm piston "Divertimento" | Sachs 502, 50/2, 50/3, 50/4
undefined

For: Sachs

35495

GPO 41 mm piston "Divertimento" | Sachs 502, 50/2, 50/3, 50/4

Nominal diameter: 41 mm · Manufacturer: GPO · Material: Aluminum · Ø outside piston (A): 40.95 mm · Compression height (C): 28 mm · Curvature (D): 3.4 mm · Total piston height (E): 50.5 mm · Number of piston rings (F): 2 pcs · Piston ring mold: Rectangular ring · Piston ring impact: Internal fuse (IS) · Piston ring height: 1.5 mm · Thick piston ring: 1.7 mm · Ø piston pin (B): 12 mm

EUR 53.30

GPO gasket set "Divertimento" & "Diablo" cylinder | Sachs 502, 50/2 (CH)
undefined

For: Sachs

35659

GPO gasket set "Divertimento" & "Diablo" cylinder | Sachs 502, 50/2 (CH)

Manufacturer: GPO · Material: Sealing carton · Number of components: 4 pcs

EUR 15.30

GPO stud bolt set "Divertimento" & "Diablo" cylinder | Sachs 502, 50/2, 50/3, 50/4
undefined

For: Sachs

35661

GPO stud bolt set "Divertimento" & "Diablo" cylinder | Sachs 502, 50/2, 50/3, 50/4

Manufacturer: GPO · Material: Steel · Surface: blackened · Diameter: 5.3 mm · Drive: External hexagon · Total length: 62 mm · Thread type: M6x1 (standard thread) · Nominal diameter (thread): 6 mm · Width across flats: 10 mm · Thread length: 7.8 mm · Strength class: 10.9 · Thread length: 11.8 mm

EUR 14.10