Set of clutch linings for original torque converters of Piaggio Ciao, Si, Bravo, Boxer and Grillo mopeds / mopeds with variomatic drive.
Ø Mounting hole: 4.1 mm
Total weight: 534 grams
Number of clutch shoes: 3 pieces
Number of springs: 3 pieces
Number of sliders: 6 pieces
Number of springs for sliders: 3
Notes: These pads do not fit the Fly Clutch torque converter, the Malossi overrange kit or original torque converters from earlier generations.
In some cases, there are slight weight differences between the pads, which has a negative effect on the concentricity of the converter and can therefore increase vibrations. This should not be a problem with original or only slightly tuned mopeds. For heavily tuned mopeds, however, you should use the Malossi pads from the accessories range, as these are much better balanced and therefore smoother running.
Unfortunately, it can also happen that the shoes do not have the required outer diameter of 90 mm after installation and therefore rub in the clutch bell even when idling. To rectify this problem, you will need to grind the linings down slightly with sandpaper.
You can find more parts for your Vario drive in the accessories section.
Original Piaggio spare part number: 249817
Made by the Italian brand Olympia.
| Manufacturer | Olympia |
| Weight | 534 g |
| Gearbox type | Vario |
| Number of jaws | 3 pcs |
| Number of springs | 3 pcs |
| Piaggio | Ciao - P, SC, PX, C24 Si Bravo / Super Bravo Boxer Grillo |
Accessories & related products
Not so nice 
Olympia torque converter Vario Ø 100 mm | Piaggio Ciao, SI, Bravo, Boxer
Thickness: 74 mm · Manufacturer: Olympia · Material: Steel · Surface: burnished · Surface: galvanized (blue) · Ø outside: 100 mm · Number of jaws: 3 pcs · Angle pulley: 17 ° · Number of springs: 3 pcs · Hardness level Counter pressure spring: Standard (30 kg - steel-colored) · Weight: 1930 g · Gearbox type: Vario
EUR 165.30
Hot 
Malossi Fly Clutch converter Vario Ø 102 mm | Piaggio SI, Bravo, Boxer
Manufacturer: Malossi · Material: Steel · Number of springs: 3 pcs · Ø outside: 102 mm · Number of jaws: 3 pcs · Angle pulley: 15 ° · Hardness level Counter pressure spring: Level 2 (35 kg - yellow / blue / black) · Gearbox type: Vario · Weight: 1170 g
EUR 236.20
Moped fans also bought
Brake cable Ø 1.8 mm x 220 cm (pear-shaped nipple)
Ø Stranded wire: 1.8 mm · Nipple shape: Pears · Ø nipple: 3.5 mm · Ø nipple: 6 mm · Manufacturer: Made in Germany · Material: Steel · Surface: galvanized (blue) · Cable length: 2200 mm · Area of application: Standard · Nipple length: 10 mm · Number of components: 1 pcs
EUR 2.85
Oil seal NBR 18/24/4 A Vario torque converter original | Piaggio Ciao, SI, Bravo, Boxer
Simmering type: A - With rubberized outer part / one sealing lip. · Manufacturer: Piaggio · Material: NBR · Ø outside: 24 mm · Ø inside: 18 mm · Surface: rubberized · Width: 4 mm · Temperature resistance (min.): -30 - 100 °C
EUR 8.05
Oil seal NBR 12/19/3 A original Vario clutch hub | Piaggio Ciao, SI, Bravo, Boxer
Simmering type: A - With rubberized outer part / one sealing lip. · Manufacturer: Piaggio · Material: NBR · Ø outside: 19 mm · Ø inside: 12 mm · Surface: rubberized · Width: 3 mm · Temperature resistance (min.): -30 - 100 °C · Piaggio OEM number: 008766
EUR 7.20
Collection only possible with online purchase and appointment.
